EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Stress Corrosion Cracking of 316L Stainless Steel Additively Manufactured with Sinter-Based Material Extrusion

Ricardo Santamaria, Ke Wang, Mobin Salasi iD, Mariano Iannuzzi iD, Michael Y Mendoza, Md Zakaria Quadir

Materials · 26.05.2023 · 16 (11) · 4006

DOI: 10.3390/ma16114006 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 26.05.2023. Verfasst von Ricardo Santamaria und 5 weiteren Autor:innen. Beteiligte Einrichtung: Curtin Corrosion Centre, Curtin University, Perth, WA 6102, Australia. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 106 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Curtin University of Technology and Woodside Energy.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study investigates the stress corrosion cracking (SCC) behavior of type 316L stainless steel (SS316L) produced with sinter-based material extrusion additive manufacturing (AM). Sinter-based material extrusion AM produces SS316L with microstructures and mechanical properties comparable to its wrought counterpart in the annealed condition. However, despite extensive research on SCC of SS316L, little is known about the SCC of sinter-based AM SS316L. This study focuses on the influence of sintered microstructures on SCC initiation and crack-branching susceptibility. Custom-made C-rings were exposed to different stress levels in acidic chloride solutions at various temperatures. Solution-annealed (SA) and cold-drawn (CD) wrought SS316L were also tested to understand the SCC behavior of SS316L better. Results showed that sinter-based AM SS316L was more susceptible to SCC initiation than SA wrought SS316L but more resistant than CD wrought SS316L, as determined by the crack initiation time. Sinter-based AM SS316L showed a noticeably lower tendency for crack-branching than both wrought SS316L counterparts. The investigation was supported by comprehensive pre- and post-test microanalysis using light optical microscopy, scanning electron microscopy, electron backscatter diffraction, and micro-computed tomography.

Schlagwörter

Stichwörter der Autor:innen

C-ring specimenchloride stress corrosion cracking (CSCC)crack-branchingporosityresidual stressestransgranular cracking

Autor:innen und Institutionen

  • Curtin Corrosion Centre, Curtin University, Perth, WA 6102, Australia.
  • Institute of Naval and Maritime Science, Universidad Austral de Chile, Valdivia 5090000, Los Rios, Chile.
  • John de Laeter Centre, Curtin University, Perth, WA 6845, Australia.

ORCID-Profile: Mobin Salasi, Mariano Iannuzzi

Förderung

  • Curtin University of Technology and Woodside Energy

Zitieren

APA

Santamaria, R., Wang, K., Salasi, M., Iannuzzi, M., Mendoza, M. Y., & Quadir, M. Z. (2023). Stress Corrosion Cracking of 316L Stainless Steel Additively Manufactured with Sinter-Based Material Extrusion. Materials, 16(11), 4006. https://doi.org/10.3390/ma16114006

Vancouver

Santamaria R, Wang K, Salasi M, Iannuzzi M, Mendoza MY, Quadir MZ. Stress Corrosion Cracking of 316L Stainless Steel Additively Manufactured with Sinter-Based Material Extrusion. Materials. 2023;16(11):4006. doi:10.3390/ma16114006

BibTeX
@article{Santamaria2023,
  author = {Santamaria, Ricardo and Wang, Ke and Salasi, Mobin and Iannuzzi, Mariano and Mendoza, Michael Y and Quadir, Md Zakaria},
  title = {Stress Corrosion Cracking of 316L Stainless Steel Additively Manufactured with Sinter-Based Material Extrusion},
  journal = {Materials},
  year = {2023},
  volume = {16},
  number = {11},
  pages = {4006},
  doi = {10.3390/ma16114006}
}
Kostenlos starten →