EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Cu–Al Ratio on Microstructure and Mechanical Properties of Cu–Al Alloys Prepared by Powder Metallurgy

Yuze Wang, Zhiyuan Wu, Lijie Zuo, Hongliang Zhang, Yiqiang He, Yi Luo, Chang Liu, Zechen Qian, Changfang Zou, Hongmiao Yu

Metals · 28.08.2024 · 14 (9) · 978

DOI: 10.3390/met14090978 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 28.08.2024. Verfasst von Yuze Wang und 9 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 25 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: 2024 Jiangsu Province Graduate Practice Innovation Program.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cu–Al alloys are widely used in electronics, new energy, and other fields due to the combination of th excellent corrosion resistance and electrical conductivity of Cu and the light weight of Al. In this paper, the powder metallurgy and equal-channel angular pressing compound technology was used to fabricate a Cu–Al alloy joint, which can be used to replace armor. Devices such as an optical microscope, electron scanning microscope, and microhardness scale were used to characterize the microstructure and mechanical properties of the Cu–Al alloys. The finite element analysis software Abaqus was used to analyze stress distribution during equal-channel angular pressing. The results indicated that the microstructure and properties of Cu–Al alloys were closely related to the volume ratio of Cu–Al. The microhardness and tensile strength were significantly increased by increasing the volume ratio of Cu–Al. As the volume ratio of Cu–Al varied from 1:2 to 2:1, the ultimate tensile strength of the Cu–Al alloys increased from 79.9 MPa to 164.9 MPa at room temperature and the microhardness increased from 60 HV to 101 HV. However, the elongation of the Cu–Al alloys hardly changed; this was about 4.4%. Crack initiation occurred at the Cu–Al interface and spread along the bonding surface of the Cu–Al alloys during the tensile process.

Förderung

  • 2024 Jiangsu Province Graduate Practice Innovation Program

Zitieren

APA

Wang, Y., Wu, Z., Zuo, L., Zhang, H., He, Y., Luo, Y., Liu, C., Qian, Z., Zou, C., & Yu, H. (2024). Effect of Cu–Al Ratio on Microstructure and Mechanical Properties of Cu–Al Alloys Prepared by Powder Metallurgy. Metals, 14(9), 978. https://doi.org/10.3390/met14090978

Vancouver

Wang Y, Wu Z, Zuo L, Zhang H, He Y, Luo Y, et al. Effect of Cu–Al Ratio on Microstructure and Mechanical Properties of Cu–Al Alloys Prepared by Powder Metallurgy. Metals. 2024;14(9):978. doi:10.3390/met14090978

BibTeX
@article{Wang2024,
  author = {Wang, Yuze and Wu, Zhiyuan and Zuo, Lijie and Zhang, Hongliang and He, Yiqiang and Luo, Yi and Liu, Chang and Qian, Zechen and Zou, Changfang and Yu, Hongmiao},
  title = {Effect of Cu–Al Ratio on Microstructure and Mechanical Properties of Cu–Al Alloys Prepared by Powder Metallurgy},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {9},
  pages = {978},
  doi = {10.3390/met14090978}
}
Kostenlos starten →