EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Laser-Induced TIG Arc Narrow-Gap Welding Technique for TC4 Titanium Alloy Thick Plates Based on the Spatial Position Control of Laser, Arc and Filler Wire

Gang Song, Zhijie Xu, Qiang Lang, Xin Liu, Hongyang Wang, Liming Liu

Metals · 26.04.2024 · 14 (5) · 510

DOI: 10.3390/met14050510 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 26.04.2024. Verfasst von Gang Song und 5 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science and Technology.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

In this paper, a novel laser-induced TIG arc narrow-gap welding technology is proposed for thick plates of TC4 titanium alloy. The feasibility of achieving high-performance welding joints is investigated by adjusting the spatial deviation position of the laser, arc, and filler wire. The results exhibited remarkable capabilities. By augmenting the laser-arc malposition, a stable deflection of the arc can be achieved, resulting in enhanced heat input to the sidewall adjacent to the laser side and improved fusion capability. Moreover, an inclined weld can be obtained through increased malposition between the filler wire and arc, which helps to improve interlayer fusion and suppress porosity defects. This method, involving alternating bilateral offsets between passes, successfully achieved narrow-gap welding of 24 mm-thick TC4 titanium alloy with an average tensile strength of 880.68 MPa (equivalent to 95.05% of base material strength). Therefore, this technology exhibits promising potential as an automated welding technique for achieving high-quality narrow-gap welding in titanium alloys.

Förderung

  • Ministry of Science and Technology

Zitieren

APA

Song, G., Xu, Z., Lang, Q., Liu, X., Wang, H., & Liu, L. (2024). A Laser-Induced TIG Arc Narrow-Gap Welding Technique for TC4 Titanium Alloy Thick Plates Based on the Spatial Position Control of Laser, Arc and Filler Wire. Metals, 14(5), 510. https://doi.org/10.3390/met14050510

Vancouver

Song G, Xu Z, Lang Q, Liu X, Wang H, Liu L. A Laser-Induced TIG Arc Narrow-Gap Welding Technique for TC4 Titanium Alloy Thick Plates Based on the Spatial Position Control of Laser, Arc and Filler Wire. Metals. 2024;14(5):510. doi:10.3390/met14050510

BibTeX
@article{Song2024,
  author = {Song, Gang and Xu, Zhijie and Lang, Qiang and Liu, Xin and Wang, Hongyang and Liu, Liming},
  title = {A Laser-Induced TIG Arc Narrow-Gap Welding Technique for TC4 Titanium Alloy Thick Plates Based on the Spatial Position Control of Laser, Arc and Filler Wire},
  journal = {Metals},
  year = {2024},
  volume = {14},
  number = {5},
  pages = {510},
  doi = {10.3390/met14050510}
}
Kostenlos starten →