Tensile Behavior and Microstructure Evolution of an Extruded 6082 Aluminum Alloy Sheet at High Temperatures
Metals · 20.12.2023 · 14 (1) · 7
DOI: 10.3390/met14010007 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 20.12.2023. Verfasst von Sawei Qiu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science foundation of China, Scientific Research Fund of Hunan Provincial Education Department of China, Scientific Research Project of Hunan Institute of Technology.
Abstract (Originalsprache)
The hot tensile behavior of an extruded 6082 alloy sheet at varying temperatures and strain rates was investigated by a Gleeble3500 thermal simulation testing machine. The optical microscope (OM), scanning electron microscope (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD) were applied to observe the microstructure evolution. It is found that the flow stress of the studied alloy declines with increasing deformation temperature. When deformed at high temperatures, the density of dislocation decreases obviously. In addition, precipitate coarsening occurs, resulting in a decrease in deformation resistance. The dimple number of the fracture samples increases with temperature and the size of the dimple becomes deeper, exhibiting an excellent plasticity. The 6082 sheet presents anisotropy of mechanical behavior at 300 °C, this can be attributed to the fibrous grain and the Brass component {011}. The anisotropic behavior seems to be slighter with an increase in temperature. No obvious anisotropic behavior was found when tensiled at 400 °C. Because it is easier to activate the slip system at elevated temperatures, meanwhile, the recrystallization begins to occur at 400 °C.
Förderung
- National Natural Science foundation of China
- Scientific Research Fund of Hunan Provincial Education Department of China
- Scientific Research Project of Hunan Institute of Technology
- Aid Program for Science and Technology Innovative Research Team in Higher Educational Institutions of Hunan Province
Zitieren
APA
Qiu, S., Xia, E., Liu, L., Ye, T., Liu, J., Tang, J., Liu, W., & Wu, Y. (2023). Tensile Behavior and Microstructure Evolution of an Extruded 6082 Aluminum Alloy Sheet at High Temperatures. Metals, 14(1), 7. https://doi.org/10.3390/met14010007
Vancouver
Qiu S, Xia E, Liu L, Ye T, Liu J, Tang J, et al. Tensile Behavior and Microstructure Evolution of an Extruded 6082 Aluminum Alloy Sheet at High Temperatures. Metals. 2023;14(1):7. doi:10.3390/met14010007
BibTeX
@article{Qiu2023,
author = {Qiu, Sawei and Xia, Erli and Liu, Limei and Ye, Tuo and Liu, Jie and Tang, Jian and Liu, Wei and Wu, Yuanzhi},
title = {Tensile Behavior and Microstructure Evolution of an Extruded 6082 Aluminum Alloy Sheet at High Temperatures},
journal = {Metals},
year = {2023},
volume = {14},
number = {1},
pages = {7},
doi = {10.3390/met14010007}
}
EUVIMED