EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Influence of Build Orientation on Surface Roughness and Fatigue Life of the Al2024-RAM2 Alloy Produced by Laser Powder Bed Fusion (L-PBF)

Radomila Konecna, Tibor Varmus, Gianni Nicoletto, Michal Jambor

Metals · 19.09.2023 · 13 (9) · 1615

DOI: 10.3390/met13091615 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 19.09.2023. Verfasst von Radomila Konecna und 3 weiteren Autor:innen. Die Arbeit wurde bisher 13-mal zitiert (Crossref) und nennt 39 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: VEGA grant agency of Slovak Republic.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Additive manufacturing of high strength Al alloys brings problems with hot cracking during rapid solidification. One of the ways to solve this challenge is technology developed by the Elementum 3D company. The way consists of inoculation by ceramic nanoparticles using RAM technology. When applying the L-PBF method, a very fine equiaxed microstructure with exceptional properties and without cracks is created. This paper offers the results and discussion of the microstructure, surface roughness and fatigue life of the high-strength Al2024-RAM2 alloy made from a gas atomized powder with an additive of 2 wt.% ceramic nanoparticles on the base of Ti. The specimens for fatigue tests were produced in different orientations relative to the building platform and left in the as-built conditions with different surface quality (roughness). The specimens were T6 heat-treated. The treatment caused a coarsening of a part of the fine grains. After T6 heat treatment, the hardness increased significantly, which occurred by precipitation hardening. Fatigue tests of specimens with different build orientation were performed in plane bending and the experimentally determined fatigue life was discussed in terms of surface roughness and material microstructure.

Förderung

  • VEGA grant agency of Slovak Republic

Zitieren

APA

Konecna, R., Varmus, T., Nicoletto, G., & Jambor, M. (2023). Influence of Build Orientation on Surface Roughness and Fatigue Life of the Al2024-RAM2 Alloy Produced by Laser Powder Bed Fusion (L-PBF). Metals, 13(9), 1615. https://doi.org/10.3390/met13091615

Vancouver

Konecna R, Varmus T, Nicoletto G, Jambor M. Influence of Build Orientation on Surface Roughness and Fatigue Life of the Al2024-RAM2 Alloy Produced by Laser Powder Bed Fusion (L-PBF). Metals. 2023;13(9):1615. doi:10.3390/met13091615

BibTeX
@article{Konecna2023,
  author = {Konecna, Radomila and Varmus, Tibor and Nicoletto, Gianni and Jambor, Michal},
  title = {Influence of Build Orientation on Surface Roughness and Fatigue Life of the Al2024-RAM2 Alloy Produced by Laser Powder Bed Fusion (L-PBF)},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {9},
  pages = {1615},
  doi = {10.3390/met13091615}
}
Kostenlos starten →