EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

The relationship between the cutting-edge, tool wear, and chip formation during Inconel 718 dry cutting

Cristian Pérez-Salinas, L. Norberto López de Lacalle, Ander del Olmo, Ch Sateesh Kumar

The International Journal of Advanced Manufacturing Technology · 2024-06 · 132 (11-12) · 6001-6017

DOI: 10.1007/s00170-024-13685-7 ↗

Kurz gefasst

Fachartikel in der Zeitschrift The International Journal of Advanced Manufacturing Technology, online erschienen am 08.05.2024. Verfasst von Cristian Pérez-Salinas und 3 weiteren Autor:innen. Die Arbeit wurde bisher 41-mal zitiert (Crossref) und nennt 62 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Blond McIndoe Research Foundation, University Excellency groups grant by Basque Government, NextGenerationEU/PRTR.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study comprehensively addresses the machining of nickel alloys, focusing its attention on crucial aspects related to chip formation and tool wear. Detailed characterization of the morphology and the chip formation process was performed by analyzing parameters such as chip segmentation ratio and variables such as shear band thickness and strain rate. Additionally, a numerical model was used to quantify stresses and temperatures at the tool/chip interface and to evaluate damage, thus contributing to the understanding of the development of chip formation. A transition in chip shapes as the toothing increases is highlighted, evidenced by segmentation ratio values below 0.5, indicative of the presence of discontinuous chips. The increase in cutting-edge radius is associated with a gradual increase in the compression ratio, indicating a higher plastic energy requirement in chip formation. Numerical simulations support this theory of failure. A significant correlation of 80% was identified between flank wear and the increase in shear force oscillation amplitude, indicating that flank wear contributes to system vibration. It is also noted that the adiabatic shear bands (ASB) are narrow, revealing a marked plastic deformation in the primary shear zone. Consequently, the remarkable incidence of wear with cutting parameters on chip formation is demonstrated, affecting the cutting force amplitude and, hence, the workpiece topography.

Förderung

  • Blond McIndoe Research Foundation
  • University Excellency groups grant by Basque Government
  • NextGenerationEU/PRTR
  • EuroBasque
  • Universidad del País Vasco

Zitieren

APA

Pérez-Salinas, C., Lacalle, L. N. L. D., Olmo, A. D., & Kumar, C. S. (2024). The relationship between the cutting-edge, tool wear, and chip formation during Inconel 718 dry cutting. The International Journal of Advanced Manufacturing Technology, 132(11-12), 6001-6017. https://doi.org/10.1007/s00170-024-13685-7

Vancouver

Pérez-Salinas C, Lacalle LNLD, Olmo AD, Kumar CS. The relationship between the cutting-edge, tool wear, and chip formation during Inconel 718 dry cutting. The International Journal of Advanced Manufacturing Technology. 2024;132(11-12):6001-6017. doi:10.1007/s00170-024-13685-7

BibTeX
@article{PrezSalinas2024,
  author = {Pérez-Salinas, Cristian and Lacalle, L. Norberto López de and Olmo, Ander del and Kumar, Ch Sateesh},
  title = {The relationship between the cutting-edge, tool wear, and chip formation during Inconel 718 dry cutting},
  journal = {The International Journal of Advanced Manufacturing Technology},
  year = {2024},
  volume = {132},
  number = {11-12},
  pages = {6001--6017},
  doi = {10.1007/s00170-024-13685-7}
}
Kostenlos starten →