EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Electrode Front-End Face Design to Improve Geometric Accuracy in Electrical Discharge Machining Process

Shih-Ming Wang, Jin-Kai Peng, Hariyanto Gunawan, Ren-Qi Tu, Shean-Juinn Chiou

Metals · 15.06.2023 · 13 (6) · 1122

DOI: 10.3390/met13061122 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 15.06.2023. Verfasst von Shih-Ming Wang und 4 weiteren Autor:innen. Die Arbeit wurde bisher 6-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science and Technology Council Taiwan.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrical discharge machining (EDM) is one of the important machining processes to produce mold components. When using the EDM process, surface quality, processing time, accuracy, and electrode cost must be considered. The electrode wear is the main factor that causes error on the geometric accuracy, especially the workpiece corner. Therefore, this study proposes a novel electrode design to improve the geometric accuracy for the EDM process. Firstly, the effect of discharge current, electrode diameter, and depth of cut on the electrode wear and workpiece corner were investigated. Multiple regression and analysis of variant were used to analyze the experiment data. The electrode end-face design with compensation rule and algorithm was established based on the data analysis and error value. Furthermore, a compensated electrode end-face design system with human machine interface, which has a procedure guiding function, was developed. The system can design the electrode end-face for minimizing workpiece corner error and improve geometric accuracy. Finally, cutting experiments were conducted to verify the proposed method, and the results show that the proposed method can effectively enhance the geometric accuracy by around 22~37%.

Förderung

  • National Science and Technology Council Taiwan

Zitieren

APA

Wang, S., Peng, J., Gunawan, H., Tu, R., & Chiou, S. (2023). A Novel Electrode Front-End Face Design to Improve Geometric Accuracy in Electrical Discharge Machining Process. Metals, 13(6), 1122. https://doi.org/10.3390/met13061122

Vancouver

Wang S, Peng J, Gunawan H, Tu R, Chiou S. A Novel Electrode Front-End Face Design to Improve Geometric Accuracy in Electrical Discharge Machining Process. Metals. 2023;13(6):1122. doi:10.3390/met13061122

BibTeX
@article{Wang2023,
  author = {Wang, Shih-Ming and Peng, Jin-Kai and Gunawan, Hariyanto and Tu, Ren-Qi and Chiou, Shean-Juinn},
  title = {A Novel Electrode Front-End Face Design to Improve Geometric Accuracy in Electrical Discharge Machining Process},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {1122},
  doi = {10.3390/met13061122}
}
Kostenlos starten →