EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Study of an Impact Mill-Based Mechanical Method for NdFeB Magnet Recycling

Emir Pošković, Fausto Franchini, Marta Ceroni, Claudia Innocenti, Luca Ferraris, Claudio Sangregorio, Andrea Caneschi, Marco Actis Grande

Metals · 12.06.2023 · 13 (6) · 1103

DOI: 10.3390/met13061103 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Metals, online erschienen am 12.06.2023. Verfasst von Emir Pošković und 7 weiteren Autor:innen. Die Arbeit wurde bisher 9-mal zitiert (Crossref) und nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Ecological Transition (Italy), National Recovery and Resilience Plan (NRRP), Italian Ministry of University and Research (MUR) funded by the European Union.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Nowadays, the circular economy is gaining more and more attention in sectors where the raw material supply is critical for both cost and geo-political reasons. Moreover, the environmental impact issue calls for recycling. From this perspective, the recovery of rare earth elements represents a strategic point. On the other hand, the high cost and the dangerous standard recovery methods that apply to NdFeB magnets limits options for traditional recycling. A new mechanical method is proposed, not requiring hydrogen, high temperature, or chemical processes, but instead using an impact mill designed to operate in vacuum. A traditional impact mill operating in a glove box filled with Ar atmosphere has also been used for comparison. The obtained NdFeB powders were analyzed in terms of magnetic properties and chemical composition, particularly in terms of the oxygen content.

Förderung

  • Ministry of Ecological Transition (Italy)
  • National Recovery and Resilience Plan (NRRP)
  • Italian Ministry of University and Research (MUR) funded by the European Union

Zitieren

APA

Pošković, E., Franchini, F., Ceroni, M., Innocenti, C., Ferraris, L., Sangregorio, C., Caneschi, A., & Grande, M. A. (2023). Study of an Impact Mill-Based Mechanical Method for NdFeB Magnet Recycling. Metals, 13(6), 1103. https://doi.org/10.3390/met13061103

Vancouver

Pošković E, Franchini F, Ceroni M, Innocenti C, Ferraris L, Sangregorio C, et al. Study of an Impact Mill-Based Mechanical Method for NdFeB Magnet Recycling. Metals. 2023;13(6):1103. doi:10.3390/met13061103

BibTeX
@article{Pokovi2023,
  author = {Pošković, Emir and Franchini, Fausto and Ceroni, Marta and Innocenti, Claudia and Ferraris, Luca and Sangregorio, Claudio and Caneschi, Andrea and Grande, Marco Actis},
  title = {Study of an Impact Mill-Based Mechanical Method for NdFeB Magnet Recycling},
  journal = {Metals},
  year = {2023},
  volume = {13},
  number = {6},
  pages = {1103},
  doi = {10.3390/met13061103}
}
Kostenlos starten →