Effect of WC Content on Microstructure and Element Diffusion of Nano WC-Co-TiC/304 Stainless Steel Composites for Micro Drill
Metals · 24.02.2023 · 13 (3) · 475
DOI: 10.3390/met13030475 ↗Kurz gefasst
Fachartikel in der Zeitschrift Metals, online erschienen am 24.02.2023. Verfasst von Rui Zhu und 7 weiteren Autor:innen. Die Arbeit wurde bisher 8-mal zitiert (Crossref) und nennt 12 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Education Department Foundation of Liaoning Province.
Abstract (Originalsprache)
In this study, WC-Co-TiC/304 stainless steel composites were successfully prepared by compression at room temperature and vacuum sintering in a special mold. Through analysis and comparison of the microstructure, density, and particle size of WC-Co-TiC/304 stainless steel composite, the effects of different WC contents on the structure and properties of WC-Co-TiC were studied. The results show that among different WC contents when the WC content is 60%, the distribution of each structure is relatively uniform and fine, and the agglomeration of each structure is not obvious. The bonding effect of WC-Co-TiC cemented carbide and 304 stainless steel composite interface is the best. With the increase of WC content, the side defects of WC-Co-TiC cemented carbide increase gradually. When WC content is 60%, the best ratio is 1:1 of Co/TiC, as the density is 94.45%, the particle size of 0.2–0.3 μm is 38.9%, and the highest hardness of WC-Co-TiC cemented carbide side is 1370 HV0.1, but it is better when the ratio of Co/TiC is 3:2 at the composite interface, as the hardness value is 852 HV0.1 and the diffusion of Cr element is more uniform, while other elements have little difference.
Förderung
- National Natural Science Foundation of China
- Education Department Foundation of Liaoning Province
Zitieren
APA
Zhu, R., Zhang, H., Wang, J., Li, H., Li, J., Zhang, Z., Zhu, Y., & Jiang, Z. (2023). Effect of WC Content on Microstructure and Element Diffusion of Nano WC-Co-TiC/304 Stainless Steel Composites for Micro Drill. Metals, 13(3), 475. https://doi.org/10.3390/met13030475
Vancouver
Zhu R, Zhang H, Wang J, Li H, Li J, Zhang Z, et al. Effect of WC Content on Microstructure and Element Diffusion of Nano WC-Co-TiC/304 Stainless Steel Composites for Micro Drill. Metals. 2023;13(3):475. doi:10.3390/met13030475
BibTeX
@article{Zhu2023,
author = {Zhu, Rui and Zhang, Hongmei and Wang, Jianling and Li, Hongnan and Li, Jinmeng and Zhang, Zhisong and Zhu, Yuchuan and Jiang, Zhengyi},
title = {Effect of WC Content on Microstructure and Element Diffusion of Nano WC-Co-TiC/304 Stainless Steel Composites for Micro Drill},
journal = {Metals},
year = {2023},
volume = {13},
number = {3},
pages = {475},
doi = {10.3390/met13030475}
}
EUVIMED