Effect of Different Laminate Thicknesses on the Microstructure and Mechanical Properties of 304 Austenitic Stainless Steel/420 Martensitic Stainless Steel Multilayer Composites
steel research international · 2026-04 · 97 (4) · 2089-2107
DOI: 10.1002/srin.202500772 ↗Kurz gefasst
Fachartikel in der Zeitschrift steel research international, online erschienen am 13.10.2025. Verfasst von Juan Li und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 50 Literaturangaben. Gefördert von: National Natural Science Foundation of China.
Abstract (Originalsprache)
This study examines how laminate thickness affects reinforcement mechanisms and mechanical properties in 304 austenitic/420 martensitic stainless steel composites. Through varied 420 layer thickness ratios (A2:1:1, A4:1:2, A6:1:3) and 1050 °C annealing, scanning electron microscope/electron backscatter diffraction/energy‐dispersive spectroscopy analyses reveal interfacial evolution, elemental diffusion, and texture. Tensile tests show thinner 420 layers (A2) effectively enhance tensile strength (700 MPa) and elongation (9.2%) by inhibiting grain coarsening, optimizing dislocation distribution, and increasing low‐angle grain boundaries. Conversely, thicker layers (A6) induce Cr/Ni enrichment (5 μm diffusion width), forming brittle interfacial phases that degrade mechanical properties (strength drops to 209.6 MPa). Postannealing, the R2 specimen achieves superior strength–ductility synergy (1048.7 MPa, 23.5% elongation) via improved interfacial bonding and recrystallization. Fractography confirms that effectively enhanced stress compatibility suppresses crack propagation, boosting energy absorption. These findings establish laminate design and thermal processing as critical levers for high‐performance composites.
Förderung
- National Natural Science Foundation of China
Zitieren
APA
Li, J., Sun, C., Wang, Q., Zhao, G., Song, Y., & Li, H. (2026). Effect of Different Laminate Thicknesses on the Microstructure and Mechanical Properties of 304 Austenitic Stainless Steel/420 Martensitic Stainless Steel Multilayer Composites. steel research international, 97(4), 2089-2107. https://doi.org/10.1002/srin.202500772
Vancouver
Li J, Sun C, Wang Q, Zhao G, Song Y, Li H. Effect of Different Laminate Thicknesses on the Microstructure and Mechanical Properties of 304 Austenitic Stainless Steel/420 Martensitic Stainless Steel Multilayer Composites. steel research international. 2026;97(4):2089-2107. doi:10.1002/srin.202500772
BibTeX
@article{Li2026,
author = {Li, Juan and Sun, Changfeng and Wang, Qi and Zhao, Guanghui and Song, Yaohui and Li, Huaying},
title = {Effect of Different Laminate Thicknesses on the Microstructure and Mechanical Properties of 304 Austenitic Stainless Steel/420 Martensitic Stainless Steel Multilayer Composites},
journal = {steel research international},
year = {2026},
volume = {97},
number = {4},
pages = {2089--2107},
doi = {10.1002/srin.202500772}
}
EUVIMED