Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy
Materials · 27.02.2025 · 18 (5) · 1056
DOI: 10.3390/ma18051056 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 27.02.2025. Verfasst von Kyung-Su Jang und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science & Engineering, Pusan National University, Busan 46241, Republic of Korea. Die Arbeit wurde bisher 14-mal zitiert (Crossref) und nennt 40 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Korea Planning & Evaluation institute of industrial technology, Technology Innovation Program (Material component technology development (R&D)), the Ministry of Trade, Industry & Energy (MOTIE, Korea).
Abstract (Originalsprache)
Al-Si alloy, known for its excellent corrosion resistance and high strength, is utilized across various industries, such as electric vehicles, requiring light metal parts for efficiency. Heat treatment is an effective process for enhancing the performance of Al-Si alloys by controlling the microstructure and precipitation. Optimized heat treatment improves the mechanical properties of Al-Si alloy, including strength, hardness, and corrosion resistance. In this study, the effect of heat treatment on the microstructure, corrosion resistance, and hardness of A356 casting alloy, which has recently been used in electric vehicles, was analyzed. The as-cast A356 alloy was used as a control sample, with a solid solution treatment, followed by aging treatment. The results showed that the hardness and corrosion resistance of A356 alloy can be changed by controlling the formation and distribution of Mg2Si precipitates within the microstructure through the solution heat treatment and following aging. Additionally, the distribution and strengthening mechanism of Mg2Si precipitates were examined using XRD. With increasing aging time, more Mg2Si precipitates were formed, increasing hardness. However, the precipitation of Mg2Si reduces the corrosion resistance of A356 alloy. Thus, it was revealed that the heat treatment of A356 alloy for enhancing mechanical properties by precipitating Mg2Si causes a side effect of corrosion resistance.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Materials Science & Engineering, Pusan National University, Busan 46241, Republic of Korea.
- Department of Metallurgical Engineering, Pukyong National University, Busan 48513, Republic of Korea.
- Department Materials Science and Engineering, Pukyong National University, Busan 48513, Republic of Korea.
ORCID-Profile: Hyunbin Jo, Sung-Dae Kim, Se-Hun Kwon, Junghoon Lee
Förderung
- Korea Planning & Evaluation institute of industrial technology
- Technology Innovation Program (Material component technology development (R&D))
- the Ministry of Trade, Industry & Energy (MOTIE, Korea)
- KEIT (Korea Planning & Evaluation institute of industrial technology)
Zitieren
APA
Jang, K. S., Jang, T., Jo, H., Shin, D., Lee, S., Kim, S. D., Kwon, S. H., & Lee, J. (2025). Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy. Materials, 18(5), 1056. https://doi.org/10.3390/ma18051056
Vancouver
Jang KS, Jang T, Jo H, Shin D, Lee S, Kim SD, et al. Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy. Materials. 2025;18(5):1056. doi:10.3390/ma18051056
BibTeX
@article{Jang2025,
author = {Jang, Kyung-Su and Jang, Taehwan and Jo, Hyunbin and Shin, Dongmin and Lee, Soomin and Kim, Sung-Dae and Kwon, Se-Hun and Lee, Junghoon},
title = {Effect of Heat Treatment on Corrosion Resistance of A356 Casting Alloy},
journal = {Materials},
year = {2025},
volume = {18},
number = {5},
pages = {1056},
doi = {10.3390/ma18051056}
}
EUVIMED