Improved Thermo-Mechanical and Flame Resistance Behaviour of Polyamide 6/Lignin Microcomposites
Macromol · 14.03.2026 · 6 (1) · 18
DOI: 10.3390/macromol6010018 ↗Kurz gefasst
Fachartikel in der Zeitschrift Macromol, online erschienen am 14.03.2026. Verfasst von Alessandro Sorze und 4 weiteren Autor:innen. Die Arbeit wurde bisher 3-mal zitiert (Crossref) und nennt 57 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This work focused on the investigation of sulfonated lignin as a novel and sustainable reinforcing filler for polyamide 6 (PA6) composites. Different formulations were thus prepared by melt compounding, varying the lignin content (5, 10, and 20 wt%). The interaction between lignin and PA6 was systematically studied through rheological, structural, morphological, thermo-mechanical, and flammability tests. Rheological measurements showed an increase in the complex viscosity and viscoelastic moduli with increasing lignin content, suggesting restricted polymer chain mobility and the formation of strong physical interactions between the molten PA6 and the lignin particles. Microstructural observations through FESEM highlighted a good dispersion of lignin particles and efficient filler–matrix interfacial adhesion. Moreover, the addition of lignin significantly increased the tensile stiffness of the composites (up to 3.4 GPa), and a lignin content of 10 wt% enhanced the tensile strength up to 58.4 MPa (i.e., +45% compared to neat PA6) without compromising the ductility. Finally, UL-94 tests revealed an improvement in flame retardancy at higher lignin contents due to the intrinsic char-forming ability of this filler. These results demonstrated that lignin could be an effective multifunctional bio-based filler that can improve the thermo-mechanical performance of PA6 without the need for compatibilizing agents.
Zitieren
APA
Sorze, A., Miani, R., Gioia, C., Fredi, G., & Dorigato, A. (2026). Improved Thermo-Mechanical and Flame Resistance Behaviour of Polyamide 6/Lignin Microcomposites. Macromol, 6(1), 18. https://doi.org/10.3390/macromol6010018
Vancouver
Sorze A, Miani R, Gioia C, Fredi G, Dorigato A. Improved Thermo-Mechanical and Flame Resistance Behaviour of Polyamide 6/Lignin Microcomposites. Macromol. 2026;6(1):18. doi:10.3390/macromol6010018
BibTeX
@article{Sorze2026,
author = {Sorze, Alessandro and Miani, Roberto and Gioia, Claudio and Fredi, Giulia and Dorigato, Andrea},
title = {Improved Thermo-Mechanical and Flame Resistance Behaviour of Polyamide 6/Lignin Microcomposites},
journal = {Macromol},
year = {2026},
volume = {6},
number = {1},
pages = {18},
doi = {10.3390/macromol6010018}
}
EUVIMED