Enhanced Mechanical Performance and Flame Resistance of Dual-Cured Biobased Unsaturated Polyester Composites Reinforced with Acryloyl-Modified Lignin
Processes · 28.04.2026 · 14 (9) · 1420
DOI: 10.3390/pr14091420 ↗Kurz gefasst
Fachartikel in der Zeitschrift Processes, online erschienen am 28.04.2026. Verfasst von Omar Almoktar Dagale und 7 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 84 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Ministry of Science, Technological Development, and Innovation of the Republic of Serbia.
Abstract (Originalsprache)
Materials derived from renewable and recycled resources offer a promising route toward more sustainable thermoset composites. In this study, waste poly(ethylene terephthalate) (PET) was depolymerized by glycolysis with propylene glycol to obtain a glycolysate, and subsequently polycondensed with biobased propylene glycol, maleic anhydride, and trimethylolpropane diallyl ether to synthesize biobased UV-curable unsaturated polyester resin (UV-bUPR). The composites were prepared with acryloyl-modified Kraft lignin (KrL-A) as a reactive bio-filler using a dual-curing approach, in which rapid UV curing was followed by thermal/redox post-curing to improve conversion and network homogeneity. The structure of the synthesized resin and composites was confirmed by FTIR and NMR spectroscopy. Mechanical properties were evaluated by tensile testing and hardness measurements, while morphology and fracture behavior were analyzed by scanning electron microscopy. The unmodified lignin decreased tensile performance due to limited compatibility with the polyester matrix and the formation of interfacial defects and agglomerates. In contrast, KrL-A exhibited improved dispersion and stronger filler–matrix interactions, resulting in superior mechanical performance. The most pronounced effect of lignin modification was observed at 15 wt.% filler loading, where the tensile strength reached 27.83 MPa, compared with 13.91 MPa for the corresponding unmodified system. The developed composites also showed improved sustainability, assessed through the E-factor, due to the combined use of recycled PET and renewable lignin.
Förderung
- Ministry of Science, Technological Development, and Innovation of the Republic of Serbia
Zitieren
APA
Dagale, O. A., Marinković, A., Simić, K., Ivanović, S., Knežević, N., Vuksanović, M. M., Vukin, M., & Rančić, M. (2026). Enhanced Mechanical Performance and Flame Resistance of Dual-Cured Biobased Unsaturated Polyester Composites Reinforced with Acryloyl-Modified Lignin. Processes, 14(9), 1420. https://doi.org/10.3390/pr14091420
Vancouver
Dagale OA, Marinković A, Simić K, Ivanović S, Knežević N, Vuksanović MM, et al. Enhanced Mechanical Performance and Flame Resistance of Dual-Cured Biobased Unsaturated Polyester Composites Reinforced with Acryloyl-Modified Lignin. Processes. 2026;14(9):1420. doi:10.3390/pr14091420
BibTeX
@article{Dagale2026,
author = {Dagale, Omar Almoktar and Marinković, Aleksandar and Simić, Katarina and Ivanović, Stefan and Knežević, Nataša and Vuksanović, Marija M. and Vukin, Marina and Rančić, Milica},
title = {Enhanced Mechanical Performance and Flame Resistance of Dual-Cured Biobased Unsaturated Polyester Composites Reinforced with Acryloyl-Modified Lignin},
journal = {Processes},
year = {2026},
volume = {14},
number = {9},
pages = {1420},
doi = {10.3390/pr14091420}
}
EUVIMED