Effect of Initial Rolling Temperature on Cross-Process Inheritance of Dimensional Accuracy and As-Formed Stress in Rolling-Bulging of GCr15SiMn Wind Turbine Bearing Rings
Machines · 06.11.2026 · 14 (11) · 1313
DOI: 10.3390/machines14111313 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 06.11.2026. Verfasst von Ruijie Gu und 7 weiteren Autor:innen. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Key R&D Special Project of Henan Province, Henan Provincial Science and Technology Research Project, Central Government Guided Local Science and Technology Development Fund Projects.
Abstract (Originalsprache)
Wind turbine main bearing rings with non-standard cross-sections are large, and a single rolling operation can hardly satisfy the simultaneous requirements of stress uniformity and dimensional accuracy; how the as-rolled state is inherited by the subsequent hot bulging remains unclear. A coupled thermo-mechanical model of the rolling-bulging sequence of a GCr15SiMn ring was therefore established in Abaqus/Explicit, transferring the geometry and the stress, plastic-strain and temperature fields across the two operations. With all bulging parameters fixed, five initial rolling temperatures (1040–1160 °C) were compared. The rolling stage was validated experimentally, the relative errors of the predicted outer diameter, inner diameter and wall thickness being below 0.37%, 0.28% and 2.5%, respectively, and the mesh-convergence deviation below 2%. Bulging reduced the mean stress by 21.9–35.6% and preserved the as-rolled uniformity ranking, the lowest stress standard deviation (3.46 MPa) occurring at 1130 °C. The outer- and inner-diameter roundness errors decreased from 6.29–7.61 and 4.13–5.14 mm to 1.05–1.44 and 0.80–1.35 mm, corresponding to correction ratios of 81–83% and 74–81%; the retained fractions stayed within 17–19% and 19–26% of the as-rolled error, so bulging scales the inherited shape error rather than equalising it. Considering dimensional accuracy and the stress state together, 1130 °C is recommended as the optimum, with 1100–1130 °C as the preferred process window. The bulging results are simulation predictions pending full-size experiments.
Förderung
- Key R&D Special Project of Henan Province
- Henan Provincial Science and Technology Research Project
- Central Government Guided Local Science and Technology Development Fund Projects
- Natural Science Foundation of Henan Province
Zitieren
APA
Gu, R., Li, H., Zhang, X., Qu, Y., Tong, Y., Zhang, Z., Wang, Q., & Wang, X. (2026). Effect of Initial Rolling Temperature on Cross-Process Inheritance of Dimensional Accuracy and As-Formed Stress in Rolling-Bulging of GCr15SiMn Wind Turbine Bearing Rings. Machines, 14(11), 1313. https://doi.org/10.3390/machines14111313
Vancouver
Gu R, Li H, Zhang X, Qu Y, Tong Y, Zhang Z, et al. Effect of Initial Rolling Temperature on Cross-Process Inheritance of Dimensional Accuracy and As-Formed Stress in Rolling-Bulging of GCr15SiMn Wind Turbine Bearing Rings. Machines. 2026;14(11):1313. doi:10.3390/machines14111313
BibTeX
@article{Gu2026,
author = {Gu, Ruijie and Li, Haotian and Zhang, Xiaohang and Qu, Yongquan and Tong, Yi and Zhang, Zhuangya and Wang, Qiang and Wang, Xiao},
title = {Effect of Initial Rolling Temperature on Cross-Process Inheritance of Dimensional Accuracy and As-Formed Stress in Rolling-Bulging of GCr15SiMn Wind Turbine Bearing Rings},
journal = {Machines},
year = {2026},
volume = {14},
number = {11},
pages = {1313},
doi = {10.3390/machines14111313}
}
EUVIMED