EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Design and Experimental Validation of a Programmable Pressure Pneumatic Knife CNC Platform for Flexible Sheet Cutting

Torpat Sirilattaporn, Nataporn Luksiri, Worathris Chungsangsatiporn, Gridsada Phanomchoeng, Ratchatin Chancharoen

Machines · 21.09.2026 · 14 (9) · 1088

DOI: 10.3390/machines14091088 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 21.09.2026. Verfasst von Torpat Sirilattaporn und 4 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a programmable pressure pneumatic knife CNC platform for the fabrication and experimental investigation of flexible sheet materials. The platform enables independent control of blade-loading pressure, feed rate, and toolpath motion, allowing pressure–feed rate operating windows for mechanical knife cutting to be established. Paper and vinyl sheets are evaluated using square and straight-line cutting patterns, with cutting quality classified into four regimes: clean cut, skimming, tearing, and crushing. The results demonstrate that insufficient pressure causes unstable blade–material contact, resulting in skimming or no-touch behavior, whereas excessive pressure promotes tearing. Paper attains a 99% clean cut rate at 1 bar and 9000 mm min−1 during square cutting, while vinyl exhibits 100% clean cuts across 3000 mm min−1 to 9000 mm min−1 at 3 bar. Straight-line cutting achieves clean cut rates of 98% for paper and 97% for vinyl at 2 bar and 7000 mm min−1. These findings support the effectiveness of programmable pressure mechanical knife cutting for repeatable fabrication of flexible sheet materials.

Zitieren

APA

Sirilattaporn, T., Luksiri, N., Chungsangsatiporn, W., Phanomchoeng, G., & Chancharoen, R. (2026). Design and Experimental Validation of a Programmable Pressure Pneumatic Knife CNC Platform for Flexible Sheet Cutting. Machines, 14(9), 1088. https://doi.org/10.3390/machines14091088

Vancouver

Sirilattaporn T, Luksiri N, Chungsangsatiporn W, Phanomchoeng G, Chancharoen R. Design and Experimental Validation of a Programmable Pressure Pneumatic Knife CNC Platform for Flexible Sheet Cutting. Machines. 2026;14(9):1088. doi:10.3390/machines14091088

BibTeX
@article{Sirilattaporn2026,
  author = {Sirilattaporn, Torpat and Luksiri, Nataporn and Chungsangsatiporn, Worathris and Phanomchoeng, Gridsada and Chancharoen, Ratchatin},
  title = {Design and Experimental Validation of a Programmable Pressure Pneumatic Knife CNC Platform for Flexible Sheet Cutting},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {9},
  pages = {1088},
  doi = {10.3390/machines14091088}
}
Kostenlos starten →