EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Novel Method for Compensating Pitch and Tooth Thickness Deviations in Face Gear Worm Grinding

Haiyu He, Yuansheng Zhou, Chao Li, Jinyuan Tang

Machines · 18.07.2026 · 14 (7) · 816

DOI: 10.3390/machines14070816 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 18.07.2026. Verfasst von Haiyu He und 3 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 41 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Central South University Innovation-Driven Research Program, Industry University Research Cooperation Project of China Aviation Engine Group Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Worm grinding is an effective approach for the precision manufacturing of face gears. However, pitch deviation and tooth thickness deviation inevitably arise during the grinding process. To reduce these deviations, this study proposes a compensation method applicable to complex topological surfaces in face gear grinding. Based on the structural configuration of a CNC face gear grinding machine, the dressing path of the grinding worm using the dressing wheel is first planned, followed by the generation of the grinding path for the face gear. Considering the tooth surface characteristics of the face gear, evaluation methods for single pitch deviation, cumulative pitch deviation, and tooth thickness error are established. The linkage polynomial method of the CNC machine tool is then employed to optimize the face gear grinding path and compensate for pitch deviation. Subsequently, a meshing tooth surface mapping method between the grinding worm and the face gear is developed to compensate for tooth thickness deviation. A compensation case study is conducted to verify the proposed method. The results indicate that the proposed compensation strategy effectively reduces both pitch and tooth thickness deviations in the face gear, with reduction rates ranging from 48.57% to 96.80%.

Förderung

  • National Natural Science Foundation of China
  • Central South University Innovation-Driven Research Program
  • Industry University Research Cooperation Project of China Aviation Engine Group Co., Ltd.

Zitieren

APA

He, H., Zhou, Y., Li, C., & Tang, J. (2026). A Novel Method for Compensating Pitch and Tooth Thickness Deviations in Face Gear Worm Grinding. Machines, 14(7), 816. https://doi.org/10.3390/machines14070816

Vancouver

He H, Zhou Y, Li C, Tang J. A Novel Method for Compensating Pitch and Tooth Thickness Deviations in Face Gear Worm Grinding. Machines. 2026;14(7):816. doi:10.3390/machines14070816

BibTeX
@article{He2026,
  author = {He, Haiyu and Zhou, Yuansheng and Li, Chao and Tang, Jinyuan},
  title = {A Novel Method for Compensating Pitch and Tooth Thickness Deviations in Face Gear Worm Grinding},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {7},
  pages = {816},
  doi = {10.3390/machines14070816}
}
Kostenlos starten →