Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive
Applied Sciences · 03.06.2025 · 15 (11) · 6298
DOI: 10.3390/app15116298 ↗Kurz gefasst
Fachartikel in der Zeitschrift Applied Sciences, online erschienen am 03.06.2025. Verfasst von Shibo Mu und 8 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Project of the Science and Technology Innovation Team of Liaoning Provincial Department of Education, Basic Research Projects of Higher Colleges and Universities of Liaoning Provincial Department of Education.
Abstract (Originalsprache)
This study proposes the use of Physics-Informed Neural Networks (PINNs) to further advance the curvature interference analysis method. The nonlinear equation system encountered in determining the curvature interference limit line is embedded into the PINN loss function, thereby enabling the solution of high-dimensional, nonlinear equations. Computational results demonstrate that the PINN model achieves a solution accuracy on the order of 10−13 when solving multidimensional nonlinear systems, which is comparable to the classical Fsolve algorithm. The curvature interference analysis reveals the presence of two curvature interference boundary lines, although they rarely extend to the worm gear tooth surface. A study on the influence of design parameters on the interference boundaries indicates that the axial installation distance has the greatest impact. Inadequate axial spacing causes the interference limit line to shift toward the inner end of the worm gear, significantly increasing the risk of interference in that region. The proposed curvature interference analysis method based on PINNs can be extended to other types of gear drives. It also lays the foundation for future work on establishing both forward and inverse mappings between design parameters and curvature interference using PINNs.
Förderung
- National Natural Science Foundation of China
- Project of the Science and Technology Innovation Team of Liaoning Provincial Department of Education
- Basic Research Projects of Higher Colleges and Universities of Liaoning Provincial Department of Education
- Liaoning Province Science and Technology Plan Joint Program
- Support Program for Young and Middle-aged Talents in Science and Technology Innovation in Shenyang
- Liaoning Huanghai Laboratory Open Innovation Fund
- Liaoning Province Natural Science Foundation
Zitieren
APA
Mu, S., Sun, X., Dong, Z., Yang, H., Liu, Y., Zhang, W., Qu, S., Zhao, H., & Zhao, Y. (2025). Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive. Applied Sciences, 15(11), 6298. https://doi.org/10.3390/app15116298
Vancouver
Mu S, Sun X, Dong Z, Yang H, Liu Y, Zhang W, et al. Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive. Applied Sciences. 2025;15(11):6298. doi:10.3390/app15116298
BibTeX
@article{Mu2025,
author = {Mu, Shibo and Sun, Xingwei and Dong, Zhixu and Yang, Heran and Liu, Yin and Zhang, Weifeng and Qu, Sheng and Zhao, Hongxun and Zhao, Yaping},
title = {Research on Curvature Interference Characteristics of Conical Surface Enveloping Cylindrical Worm–Face Worm Gear Drive},
journal = {Applied Sciences},
year = {2025},
volume = {15},
number = {11},
pages = {6298},
doi = {10.3390/app15116298}
}
EUVIMED