EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Modeling and Identification Method for Industrial Robot Positioning Accuracy Based on Parameter and Error Separation

Xianpeng Zhang, Xiaojian Zhang, Xu Zhang, Tao Ling, Dawei Tu

Machines · 10.06.2026 · 14 (6) · 678

DOI: 10.3390/machines14060678 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 10.06.2026. Verfasst von Xianpeng Zhang und 4 weiteren Autor:innen. Die Arbeit nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, National Key Research and Development Program of China under Grant.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Kinematic modeling and parameter identification are essential for achieving high-precision robot calibration. A widely used strategy involves utilizing the end-effector position error for parameter identification. However, the strong coupling between length and angular parameters often impedes calibration accuracy. In addition, substantial differences in their scales further exacerbate this issue. To overcome these limitations, following the variable projection method, this paper reformulates the conventional Modified Denavit–Hartenberg (MDH) model into a separable nonlinear structure. This allows independent identification of the two parameter types. Non-geometric errors such as joint compliance and backlash are also explicitly taken into account. The backlash errors are separated from the angular positions of each joint by modeling their bidirectional positioning errors with Chebyshev polynomials. This method enables the establishment of a comprehensive positioning error model to mitigate the influence of backlash errors. Based on the variable projection method, an improved variable projection with modified Gram–Schmidt (IVPMGS) identification method is proposed, which also eliminates redundant parameters that hinder identification robustness. Simulations indicate that the proposed method achieves faster convergence and higher identification accuracy. Compensation experiments demonstrate that the average absolute positioning error is reduced from 0.1804 mm to 0.0917 mm compared with the traditional MDH model, corresponding to a 49.17% improvement in positioning accuracy. These findings confirm the accuracy and effectiveness of the proposed approach.

Förderung

  • National Natural Science Foundation of China
  • National Key Research and Development Program of China under Grant

Zitieren

APA

Zhang, X., Zhang, X., Zhang, X., Ling, T., & Tu, D. (2026). A Modeling and Identification Method for Industrial Robot Positioning Accuracy Based on Parameter and Error Separation. Machines, 14(6), 678. https://doi.org/10.3390/machines14060678

Vancouver

Zhang X, Zhang X, Zhang X, Ling T, Tu D. A Modeling and Identification Method for Industrial Robot Positioning Accuracy Based on Parameter and Error Separation. Machines. 2026;14(6):678. doi:10.3390/machines14060678

BibTeX
@article{Zhang2026,
  author = {Zhang, Xianpeng and Zhang, Xiaojian and Zhang, Xu and Ling, Tao and Tu, Dawei},
  title = {A Modeling and Identification Method for Industrial Robot Positioning Accuracy Based on Parameter and Error Separation},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {6},
  pages = {678},
  doi = {10.3390/machines14060678}
}
Kostenlos starten →