EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Automatic Calibration of Robotic 3D Printer Swarms for Cooperative 3D Printing

Swaleh Owais, Charith Oshadi Nanayakkara Ratnayake, Ali Ugur, Zhenghui Sha, Wenchao Zhou

Machines · 16.04.2026 · 14 (4) · 443

DOI: 10.3390/machines14040443 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 16.04.2026. Verfasst von Swaleh Owais und 4 weiteren Autor:innen. Die Arbeit nennt 58 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Foundation.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Cooperative 3D printing (C3DP) is an additive manufacturing paradigm where a swarm of robotic 3D printers work cooperatively in a shared environment to fabricate continuous parts. Reliable operation requires both accurate per-printer kinematic calibration and cross-printer spatial alignment. This paper presents an automatic vision-based XY calibration workflow for C3DP using ArUco fiducials and low-cost monocular cameras. The method performs intra-printer kinematic calibration and inter-printer alignment through peer-to-peer observations without fixed global infrastructure. In a two-printer Selective Compliance Assembly Robot Arm (SCARA) Fused Filament Fabrication (FFF) testbed, the automatic workflow reduced total calibration time from 157.19 min (manual) to 36.49 min while improving positional consistency and print accuracy. For individual-printer artifacts, the mean Euclidean error was 0.03 ± 0.02 mm, whereas cooperative artifacts exhibited a mean Euclidean error of 0.078 ± 0.002 mm. These results show that practical and repeatable C3DP calibration can be achieved with low-cost vision hardware.

Förderung

  • National Science Foundation

Zitieren

APA

Owais, S., Ratnayake, C. O. N., Ugur, A., Sha, Z., & Zhou, W. (2026). Automatic Calibration of Robotic 3D Printer Swarms for Cooperative 3D Printing. Machines, 14(4), 443. https://doi.org/10.3390/machines14040443

Vancouver

Owais S, Ratnayake CON, Ugur A, Sha Z, Zhou W. Automatic Calibration of Robotic 3D Printer Swarms for Cooperative 3D Printing. Machines. 2026;14(4):443. doi:10.3390/machines14040443

BibTeX
@article{Owais2026,
  author = {Owais, Swaleh and Ratnayake, Charith Oshadi Nanayakkara and Ugur, Ali and Sha, Zhenghui and Zhou, Wenchao},
  title = {Automatic Calibration of Robotic 3D Printer Swarms for Cooperative 3D Printing},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {443},
  doi = {10.3390/machines14040443}
}
Kostenlos starten →