EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Mathematical Modeling and Topographic Error Compensation for Plunge-Shaving Cutters Generated by a Grinding Worm

Shih-Sheng Chen, Ruei-Hung Hsu, Jau-Liang Chen

Machines · 27.03.2026 · 14 (4) · 373

DOI: 10.3390/machines14040373 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 27.03.2026. Verfasst von Shih-Sheng Chen und 2 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Plunge shaving is a widely used finishing process for high-precision gears due to its high productivity and cost-effectiveness. However, manufacturing the plunge-shaving cutter itself remains challenging, particularly for modified tooth profiles. Because the theoretical cutter flank exhibits a hyperboloid-like geometry in the lead direction, conventional disk-wheel grinding tends to introduce systematic twist-like topographic bias. To overcome this limitation, a comprehensive mathematical framework is developed for the generative grinding of plunge-shaving cutters using an involute-helicoid grinding worm. Based on envelope theory and homogeneous coordinate transformations, the theoretical cutter surface is first derived, followed by the establishment of a complete kinematic grinding model. A linear least-squares optimization algorithm is then formulated to determine the optimal center-distance compensation parameter for minimizing the normal deviation between the generated and theoretical surfaces. Numerical simulations demonstrate that the proposed method significantly suppresses twist-related topographic errors. In a benchmark moderate-helix case, the maximum residual deviation is controlled to approximately 2 µm. For a more demanding large-helix configuration, a two-level optimization strategy—combining machine-setting compensation and grinding-worm helix-angle adjustment—reduces the peak deviation from about 5.5 µm to 4.7 µm, corresponding to an improvement of approximately 15%. This confirms that worm-geometry tuning provides an additional, effective degree of freedom for high-helix cutter applications.

Zitieren

APA

Chen, S., Hsu, R., & Chen, J. (2026). Mathematical Modeling and Topographic Error Compensation for Plunge-Shaving Cutters Generated by a Grinding Worm. Machines, 14(4), 373. https://doi.org/10.3390/machines14040373

Vancouver

Chen S, Hsu R, Chen J. Mathematical Modeling and Topographic Error Compensation for Plunge-Shaving Cutters Generated by a Grinding Worm. Machines. 2026;14(4):373. doi:10.3390/machines14040373

BibTeX
@article{Chen2026,
  author = {Chen, Shih-Sheng and Hsu, Ruei-Hung and Chen, Jau-Liang},
  title = {Mathematical Modeling and Topographic Error Compensation for Plunge-Shaving Cutters Generated by a Grinding Worm},
  journal = {Machines},
  year = {2026},
  volume = {14},
  number = {4},
  pages = {373},
  doi = {10.3390/machines14040373}
}
Kostenlos starten →