Optimization of End Mill Geometry for Machining 1.2379 Cold-Work Tool Steel Through Hybrid RSM-ANN-GA Coupled FEA Approach
Machines · 21.12.2025 · 14 (1) · 15
DOI: 10.3390/machines14010015 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 21.12.2025. Verfasst von Tolga Berkay Şirin und 6 weiteren Autor:innen. Die Arbeit wurde bisher 19-mal zitiert (Crossref) und nennt 104 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Optimizing end mill geometry is critical for improving performance and reducing costs in the high-volume manufacturing of tools, dies and molds. This study demonstrates a successful optimization framework for solid end mills machining 1.2379 cold-work tool steel, integrating Finite Element Analysis (FEA), Artificial Neural Networks (ANN), and Genetic Algorithms (GA). The optimized tool geometry, derived from four key design parameters, delivered substantial performance gains over an industrial reference (parent) tool. Our ANN-GA model achieved a remarkable predictive accuracy (R = 0.75–0.98) over the RSM model (R = 0.17–0.63) and identified an optimal design that reduced the resultant cutting force by approximately 11% (to 142.8 N) and improved surface roughness by 21% (to 0.1637 µm) compared to experimental baselines. Crucially, the new geometry halved the tool breakage rate from 50% to ~25%. Parameter analysis revealed the width of the land as the most influential geometric factor. This work provides a validated, high-performance tool design and a powerful modeling framework for advancing machining efficiency in tool, mold and die manufacturing.
Zitieren
APA
Şirin, T. B., Der, O., Kuş, H., Avdan, Ç. G., Yüksel, S., Etyemez, A., & Ay, M. (2025). Optimization of End Mill Geometry for Machining 1.2379 Cold-Work Tool Steel Through Hybrid RSM-ANN-GA Coupled FEA Approach. Machines, 14(1), 15. https://doi.org/10.3390/machines14010015
Vancouver
Şirin TB, Der O, Kuş H, Avdan ÇG, Yüksel S, Etyemez A, et al. Optimization of End Mill Geometry for Machining 1.2379 Cold-Work Tool Steel Through Hybrid RSM-ANN-GA Coupled FEA Approach. Machines. 2025;14(1):15. doi:10.3390/machines14010015
BibTeX
@article{irin2025,
author = {Şirin, Tolga Berkay and Der, Oguzhan and Kuş, Hasan and Avdan, Çağla Gökbulut and Yüksel, Semih and Etyemez, Ayhan and Ay, Mustafa},
title = {Optimization of End Mill Geometry for Machining 1.2379 Cold-Work Tool Steel Through Hybrid RSM-ANN-GA Coupled FEA Approach},
journal = {Machines},
year = {2025},
volume = {14},
number = {1},
pages = {15},
doi = {10.3390/machines14010015}
}
EUVIMED