Advances In End Mill Cutting Tool Geometries for Enhanced Cryogenic Machining Performance
AFRICAN JOURNAL OF APPLIED RESEARCH · 04.07.2026 · 12 (5) · 85-102
DOI: 10.26437/jr1f2r44 ↗Kurz gefasst
Fachartikel in der Zeitschrift AFRICAN JOURNAL OF APPLIED RESEARCH, online erschienen am 04.07.2026. Verfasst von H. M. Bansod und 1 weiteren Autor:innen. Die Arbeit nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY-NC 4.0).
Abstract (Originalsprache)
Purpose
The purpose of this paper is to analyse the influence of end mill cutting tool geometries on the performance of cryogenic milling processes for difficult-to-machine materials. Design/Methodology/Approach: An end-mill geometry and cryogenic cooling method were reviewed to determine the effects of end-mill geometry in the literature. Cryogenic cooling was comparatively analysed against conventional cooling methods such as dry machining, flood cooling, and minimum quantity lubrication (MQL). Research Limitation: This study is limited to a review-based analysis of the published literature on cryogenic milling and end-milling geometries. No statistical or experimental validation was performed in this review. The variations in cooling methods, materials, and machining conditions make direct comparison difficult.
Findings
The analysis has shown that cryogenic cooling plays a significant role in lowering the cutting temperature, thereby increasing tool life, improving surface finish, and minimising environmental effects compared to conventional cooling processes. The tool geometry is vital to the optimisation of cryogenic milling, as it affects chip formation, heat transfer, and stability during cutting. The most promising performance improvements are shown by hybrid solutions that combine optimal tool geometry, advanced coatings, and an efficient cryogen delivery system. Practical Implication: The findings can be applied by manufacturing engineers and researchers to develop optimal cutting tools and cooling methods for machining hard-to-cut materials. Social Implication: The use of harmful cutting fluids can be minimised by adopting cryogenic milling and optimised cutting tool geometries. Originality/Value: It correlates tool geometry with machining performance and discusses future trends, including AI-assisted optimisation, additively manufactured tools, and adaptive tool design for sustainable machining.
Zitieren
APA
Bansod, H. M., & Kubde, R. A. (2026). Advances In End Mill Cutting Tool Geometries for Enhanced Cryogenic Machining Performance. AFRICAN JOURNAL OF APPLIED RESEARCH, 12(5), 85-102. https://doi.org/10.26437/jr1f2r44
Vancouver
Bansod HM, Kubde RA. Advances In End Mill Cutting Tool Geometries for Enhanced Cryogenic Machining Performance. AFRICAN JOURNAL OF APPLIED RESEARCH. 2026;12(5):85-102. doi:10.26437/jr1f2r44
BibTeX
@article{Bansod2026,
author = {Bansod, H. M. and Kubde, R. A.},
title = {Advances In End Mill Cutting Tool Geometries for Enhanced Cryogenic Machining Performance},
journal = {AFRICAN JOURNAL OF APPLIED RESEARCH},
year = {2026},
volume = {12},
number = {5},
pages = {85--102},
doi = {10.26437/jr1f2r44}
}
EUVIMED