EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

A Comprehensive Tooth Surface Modification Method for Harmonic Drive by Changing the Radial Deformation Coefficient

Feng Yin, Zhezhen Cao, Bingquan Lu, Yuansheng Zhou, Shenghui Wang, Jinyuan Tang

Machines · 13.10.2025 · 13 (10) · 942

DOI: 10.3390/machines13100942 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 13.10.2025. Verfasst von Feng Yin und 5 weiteren Autor:innen. Die Arbeit wurde bisher 2-mal zitiert (Crossref) und nennt 35 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: AECC, National Key R&D Program of China, Industry University Research Cooperation Project of China Aviation Engine Group Co., Ltd..

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The tooth surface geometry of harmonic gears directly affects the transmission accuracy and service life. Traditional design methods may cause tooth profile distortion when changing the radial deformation coefficient, which limits their application. This paper proposes a comprehensive tooth surface modification method that changes the radial deformation coefficient on the basis of traditional design methods. Firstly, the meshing trajectories and corresponding tooth profiles of gear teeth under different radial deformation coefficients are calculated and analyzed based on the rack approximation method. Secondly, a calculation method is proposed to eliminate the tooth profile distortion caused by changing the radial deformation coefficient, which not only expands the application of the rack approximation method but also eliminates interference during the meshing process. Subsequently, a comprehensive tooth surface modification method is proposed with the aim of increasing contact area and contact ratio, as well as reducing contact stress. Compared to traditional modification, it requires less material removal, which is beneficial for increasing the tooth strength. Furthermore, a finite element simulation model of a harmonic drive is established, and the tooth surface and contact performance of harmonic gears under three different radial deformation coefficients are designed and analyzed, verifying the effectiveness of the proposed tooth surface design method.

Förderung

  • AECC
  • National Key R&D Program of China
  • Industry University Research Cooperation Project of China Aviation Engine Group Co., Ltd.
  • National Natural Science Foundation of China
  • Science and Technology Innovation Program of Hunan Province
  • Central South University Innovation-Driven Research Program
  • Fundamental Research Funds for the Central Universities of Central South University
  • Project of State Key Laboratory of Precision Manufacturing for Extreme Service Performance

Zitieren

APA

Yin, F., Cao, Z., Lu, B., Zhou, Y., Wang, S., & Tang, J. (2025). A Comprehensive Tooth Surface Modification Method for Harmonic Drive by Changing the Radial Deformation Coefficient. Machines, 13(10), 942. https://doi.org/10.3390/machines13100942

Vancouver

Yin F, Cao Z, Lu B, Zhou Y, Wang S, Tang J. A Comprehensive Tooth Surface Modification Method for Harmonic Drive by Changing the Radial Deformation Coefficient. Machines. 2025;13(10):942. doi:10.3390/machines13100942

BibTeX
@article{Yin2025,
  author = {Yin, Feng and Cao, Zhezhen and Lu, Bingquan and Zhou, Yuansheng and Wang, Shenghui and Tang, Jinyuan},
  title = {A Comprehensive Tooth Surface Modification Method for Harmonic Drive by Changing the Radial Deformation Coefficient},
  journal = {Machines},
  year = {2025},
  volume = {13},
  number = {10},
  pages = {942},
  doi = {10.3390/machines13100942}
}
Kostenlos starten →