EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Experimental Analysis of a Coaxial Magnetic Gear Prototype

Stefano Lovato, Giovanni Barosco, Ludovico Ortombina, Riccardo Torchio, Piergiorgio Alotto, Maurizio Repetto, Matteo Massaro

Machines · 12.08.2025 · 13 (8) · 716

DOI: 10.3390/machines13080716 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 12.08.2025. Verfasst von Stefano Lovato und 6 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Università degli Studi di Padova.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Magnetic gears are becoming promising devices that can replace conventional mechanical gears in several applications, where reduced maintenance, absence of lubrication and intrinsic overload protection are especially relevant. This paper focuses on the experimental analysis of a coaxial magnetic gear prototype recently developed at the Department of Industrial Engineering of the University of Padova. It is found that its efficiency is high and aligned with prototypes in the literature, its stationary response confirms the velocity ratio of the corresponding mechanical planetary gear, the overload protection is aligned with numerical prediction, while the dynamic response highlights that the intrinsic compliance of the magnetic coupling prevents the use of such device in high-frequency transients. It is concluded that the proposed architecture can be effectively employed for speed reducers applications where low-frequency modulation is sufficient, which includes many industrial applications. Nevertheless, high rotational speeds are allowed. The performance characteristics, although specific for the prototype considered, experimentally highlights the key features of coaxial magnetic gear devices. The experimental performance are also compared with estimations from the literature, when available.

Förderung

  • Università degli Studi di Padova

Zitieren

APA

Lovato, S., Barosco, G., Ortombina, L., Torchio, R., Alotto, P., Repetto, M., & Massaro, M. (2025). Experimental Analysis of a Coaxial Magnetic Gear Prototype. Machines, 13(8), 716. https://doi.org/10.3390/machines13080716

Vancouver

Lovato S, Barosco G, Ortombina L, Torchio R, Alotto P, Repetto M, et al. Experimental Analysis of a Coaxial Magnetic Gear Prototype. Machines. 2025;13(8):716. doi:10.3390/machines13080716

BibTeX
@article{Lovato2025,
  author = {Lovato, Stefano and Barosco, Giovanni and Ortombina, Ludovico and Torchio, Riccardo and Alotto, Piergiorgio and Repetto, Maurizio and Massaro, Matteo},
  title = {Experimental Analysis of a Coaxial Magnetic Gear Prototype},
  journal = {Machines},
  year = {2025},
  volume = {13},
  number = {8},
  pages = {716},
  doi = {10.3390/machines13080716}
}
Kostenlos starten →