EUVIMEDEUVIMED entdecken
Crossref

Working Harmonic Analysis of Coaxial Magnetic Gear and Its Application in Motor Integration

Yang Liu, Bao Song, Xiangdong Zhou

IEEE Transactions on Transportation Electrification · 2025-10 · 11 (5) · 11755-11765

DOI: 10.1109/tte.2025.3581595 ↗

Kurz gefasst

Fachartikel in der Zeitschrift IEEE Transactions on Transportation Electrification, 2025-10. Verfasst von Yang Liu und 2 weiteren Autor:innen. Die Arbeit wurde bisher 5-mal zitiert (Crossref) und nennt 31 Literaturangaben. Gefördert von: National Science and Technology Major Project, Key Research and Development Program of Hubei Province.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Coaxial magnetic gear (CMG) exhibits the advantages including lubrication-free, inherent overload protection, and less maintenance cost; thus, it has received lots of attention in low-speed high-torque applications. However, the majority of CMG research is concentrated on the development of innovative topologies, and the investigation of the flux density harmonic characteristics is barely seen. In this article, a new perspective of analyzing the flux density harmonic characteristics is presented for three most typical CMGs, i.e., surface-mounted CMG (SM-CMG), spoke-type CMG (ST-CMG), and triple-layer CMG (TL-CMG). On this basis, the corresponding contributions of the flux density harmonics to the average torque are comparatively studied and quantified. In addition, the three CMGs are globally optimized based on the multiobjective genetic algorithm (MOGA), to allow for a more comprehensive comparison of other key performances. The results indicate that the TL-CMG has the best overall performance among these CMGs. As the CMG is usually integrated with the motor, the integration pattern of the two is analyzed. Finally, a prototype for the automated guided vehicle (AGV) robot application is built and tested, and the experimental results match well with the simulation results.

Förderung

  • National Science and Technology Major Project
  • Key Research and Development Program of Hubei Province

Zitieren

APA

Liu, Y., Song, B., & Zhou, X. (2025). Working Harmonic Analysis of Coaxial Magnetic Gear and Its Application in Motor Integration. IEEE Transactions on Transportation Electrification, 11(5), 11755-11765. https://doi.org/10.1109/tte.2025.3581595

Vancouver

Liu Y, Song B, Zhou X. Working Harmonic Analysis of Coaxial Magnetic Gear and Its Application in Motor Integration. IEEE Transactions on Transportation Electrification. 2025;11(5):11755-11765. doi:10.1109/tte.2025.3581595

BibTeX
@article{Liu2025,
  author = {Liu, Yang and Song, Bao and Zhou, Xiangdong},
  title = {Working Harmonic Analysis of Coaxial Magnetic Gear and Its Application in Motor Integration},
  journal = {IEEE Transactions on Transportation Electrification},
  year = {2025},
  volume = {11},
  number = {5},
  pages = {11755--11765},
  doi = {10.1109/tte.2025.3581595}
}
Kostenlos starten →