EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach

Mohammad Ghasemian Fard, Hamid Baseri, Aref Azami, Abbas Zolfaghari

Machines · 06.11.2024 · 12 (11) · 783

DOI: 10.3390/machines12110783 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 06.11.2024. Verfasst von Mohammad Ghasemian Fard und 3 weiteren Autor:innen. Die Arbeit wurde bisher 11-mal zitiert (Crossref) und nennt 26 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Carbon fiber-reinforced polymer (CFRP) structures have been increasingly used in various aerospace sectors due to their outstanding mechanical properties in recent years. However, the poor machinability of CFRP plates, combined with the inhomogeneous behavior of fibers, poses a challenge for manufacturers and researchers to define the critical factors and conditions necessary to ensure the quality of holes in CFRP structures. This study aims to analyze the effect of drilling parameters on CFRP delamination and to predict hole quality using a regression-based approach. The design of the experiment (DOE) was conducted using Taguchi’s L9 3-level orthogonal array. The input drilling variables included the feed rate, spindle speed, and three different drill types. A regression-based model using partial least squares (PLS) was developed to predict delamination defects during the drilling of CFRP plates. The PLS model demonstrated high accuracy in predicting delamination defects, with a Mean Squared Error (MSE) of 0.0045, corresponding to an accuracy of approximately 99.6%, enabling the rapid estimation of delamination. The model’s predictions were closely aligned with the experimental results, although some deviations were observed due to tool inefficiencies, particularly with end mill cutters. These findings offer valuable insights for researchers and practitioners, enhancing the understanding of delamination in CFRPs and identifying areas for further investigation.

Zitieren

APA

Fard, M. G., Baseri, H., Azami, A., & Zolfaghari, A. (2024). Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach. Machines, 12(11), 783. https://doi.org/10.3390/machines12110783

Vancouver

Fard MG, Baseri H, Azami A, Zolfaghari A. Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach. Machines. 2024;12(11):783. doi:10.3390/machines12110783

BibTeX
@article{Fard2024,
  author = {Fard, Mohammad Ghasemian and Baseri, Hamid and Azami, Aref and Zolfaghari, Abbas},
  title = {Prediction of Delamination Defects in Drilling of Carbon Fiber Reinforced Polymers Using a Regression-Based Approach},
  journal = {Machines},
  year = {2024},
  volume = {12},
  number = {11},
  pages = {783},
  doi = {10.3390/machines12110783}
}
Kostenlos starten →