EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

An Optimization Method for Multi-Robot Automatic Welding Control Based on Particle Swarm Genetic Algorithm

Lu Chen, Jie Tan, Tianci Wu, Zengxin Tan, Guobo Yuan, Yuhao Yang, Chiang Liu, Haoyu Zhou, Weisi Xie, Yue Xiu, Gun Li

Machines · 30.10.2024 · 12 (11) · 763

DOI: 10.3390/machines12110763 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Machines, online erschienen am 30.10.2024. Verfasst von Lu Chen und 10 weiteren Autor:innen. Die Arbeit wurde bisher 20-mal zitiert (Crossref) und nennt 42 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: UESTC-Houngfuh Joint Laboratory of Smart Logistics, National Key Research and Development Program of China, Key Laboratory of Industrial Internet of Things and Networked Control, Ministry of Education of China.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper introduces an optimization method for multi-robot automated control welding based on a Particle Swarm Genetic Algorithm (PSGA), aiming to address issues such as high costs, large footprint, and excessive production cycles in multi-robot welding production lines. The method first constructs a multi-axis robotic kinematic model to provide constraint conditions. Then, the PSO (particle swarm optimization) algorithm, which integrates penalty functions into the fitness evaluation, is used to determine the optimal welding path by simulating collective behavior within a group. The GA (genetic algorithm) encodes the position of the welding robot bases into chromosomes to find the optimal layout for coordinated control of multiple robots. The entire process is optimized according to welding standards and requirements. Additionally, a comprehensive production line performance estimation model was used to quantitatively analyze the new scheme. The results show that the optimized production line’s balance rate increased by 10%, the balance loss rate decreased by 10%, the smoothness index increased by 37.8%, the space costs reduced by 44.4%, the equipment demand reduced by 41.1%, the labor demand reduced by 50%, the total costs reduced by 10%, and the average product cycle time was reduced by 5.07 s. Finally, we tested the algorithm in various complex scenarios and compared its performance against mainstream algorithms within the context of this study. The results demonstrated that the optimized production line significantly improved efficiency while maintaining safety standards.

Förderung

  • UESTC-Houngfuh Joint Laboratory of Smart Logistics
  • National Key Research and Development Program of China
  • Key Laboratory of Industrial Internet of Things and Networked Control, Ministry of Education of China

Zitieren

APA

Chen, L., Tan, J., Wu, T., Tan, Z., Yuan, G., Yang, Y., Liu, C., Zhou, H., Xie, W., Xiu, Y., & Li, G. (2024). An Optimization Method for Multi-Robot Automatic Welding Control Based on Particle Swarm Genetic Algorithm. Machines, 12(11), 763. https://doi.org/10.3390/machines12110763

Vancouver

Chen L, Tan J, Wu T, Tan Z, Yuan G, Yang Y, et al. An Optimization Method for Multi-Robot Automatic Welding Control Based on Particle Swarm Genetic Algorithm. Machines. 2024;12(11):763. doi:10.3390/machines12110763

BibTeX
@article{Chen2024,
  author = {Chen, Lu and Tan, Jie and Wu, Tianci and Tan, Zengxin and Yuan, Guobo and Yang, Yuhao and Liu, Chiang and Zhou, Haoyu and Xie, Weisi and Xiu, Yue and Li, Gun},
  title = {An Optimization Method for Multi-Robot Automatic Welding Control Based on Particle Swarm Genetic Algorithm},
  journal = {Machines},
  year = {2024},
  volume = {12},
  number = {11},
  pages = {763},
  doi = {10.3390/machines12110763}
}
Kostenlos starten →