A Review of Proposed Models for Cutting Force Prediction in Milling Parts with Low Rigidity
Machines · 17.02.2024 · 12 (2) · 140
DOI: 10.3390/machines12020140 ↗Kurz gefasst
Fachartikel in der Zeitschrift Machines, online erschienen am 17.02.2024. Verfasst von Petrica Radu und 1 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 224 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
Milling parts with low rigidity (thin-walled parts) are increasingly attracting the interest of the academic and industrial environment, due to the applicability of these components in industrial sectors of strategic interest at the international level in the aerospace industry, nuclear industry, defense industry, automotive industry, etc. Their low rigidity and constantly changing strength during machining lead on the one hand to instability of the cutting process and on the other hand to part deformation. Solving both types of problems (dynamic and static) must be preceded by prediction of cutting forces as accurately as possible, as they have a significant meaning for machining condition identification and process performance evaluation. Since there are plenty of papers dealing with this topic in the literature, the current research attempts to summarize the models used for prediction of force in milling of thin-walled parts and to identify which are the trends in addressing this issue from the perspective of intelligent production systems.
Zitieren
APA
Radu, P., & Schnakovszky, C. (2024). A Review of Proposed Models for Cutting Force Prediction in Milling Parts with Low Rigidity. Machines, 12(2), 140. https://doi.org/10.3390/machines12020140
Vancouver
Radu P, Schnakovszky C. A Review of Proposed Models for Cutting Force Prediction in Milling Parts with Low Rigidity. Machines. 2024;12(2):140. doi:10.3390/machines12020140
BibTeX
@article{Radu2024,
author = {Radu, Petrica and Schnakovszky, Carol},
title = {A Review of Proposed Models for Cutting Force Prediction in Milling Parts with Low Rigidity},
journal = {Machines},
year = {2024},
volume = {12},
number = {2},
pages = {140},
doi = {10.3390/machines12020140}
}
EUVIMED