EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Cement-Based Hybrid Heating Composites Obtained Using 3D Printing

Paulina Szołdra, Maksymilian Frąc, Kristina Roder, Shaun George Antony, Daisy Nestler, Jonas Stiller, Lothar Kroll, Waldemar Pichór

Materials · 19.11.2026 · 19 (22) · 4895

DOI: 10.3390/ma19224895 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.11.2026. Verfasst von Paulina Szołdra und 7 weiteren Autor:innen. Die Arbeit nennt 31 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Science Centre, Poland.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Electrically conductive cementitious composites offer significant potential for self-heating applications, but conventional approaches require conductive additives throughout the material. This study proposes a hybrid composite combining 3D-printed conductive pathways with a conventional cementitious matrix, enabling localized heating while reducing additive consumption. Cement pastes containing 0.50–1.25 wt.% chopped carbon fibers (CFs) were characterized using electrical resistivity, impedance spectroscopy, and Joule-heating tests. The electrical percolation threshold was exceeded above 0.75 wt.% CF, with a marked improvement in heating performance between 0.75 and 1.00 wt.%. At 15 V, specimens containing 1.0 wt.% CF reached 68 °C within approximately 25 min, achieving a surface power density of around 1 kW/m2. A printable mixture containing 1.0 wt.% CF and 0.50 wt.% hydroxypropyl methylcellulose (HPMC) was subsequently developed to produce conductive pathways integrated into a conventionally cast matrix. Thermal imaging confirmed localized heat generation and effective heat transfer through the specimen. Increasing the applied voltage from 20 to 30 V raised the temperature above the conductive pathway from approximately 33 to 42 °C after 60 min. These findings demonstrate the potential of combining additive and conventional manufacturing to develop smart cementitious components with spatially controlled heating while limiting conductive additives to functionally relevant areas.

Förderung

  • National Science Centre, Poland

Zitieren

APA

Szołdra, P., Frąc, M., Roder, K., Antony, S. G., Nestler, D., Stiller, J., Kroll, L., & Pichór, W. (2026). Cement-Based Hybrid Heating Composites Obtained Using 3D Printing. Materials, 19(22), 4895. https://doi.org/10.3390/ma19224895

Vancouver

Szołdra P, Frąc M, Roder K, Antony SG, Nestler D, Stiller J, et al. Cement-Based Hybrid Heating Composites Obtained Using 3D Printing. Materials. 2026;19(22):4895. doi:10.3390/ma19224895

BibTeX
@article{Szodra2026,
  author = {Szołdra, Paulina and Frąc, Maksymilian and Roder, Kristina and Antony, Shaun George and Nestler, Daisy and Stiller, Jonas and Kroll, Lothar and Pichór, Waldemar},
  title = {Cement-Based Hybrid Heating Composites Obtained Using 3D Printing},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4895},
  doi = {10.3390/ma19224895}
}
Kostenlos starten →