EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructural Evolution, Densification, and Mechanical–Tribological Performance of AlSi12-Modified NiCrBSi Composites Fabricated by Spark Plasma Sintering

Ertuğrul Çelik, Yusuf Donat, Turan Gurgenc, Mehmet Erdi Korkmaz, Elshan Sefidgar Shahanaghi, Cevher Kürsat Macit, Tarık Selçuk Şeker, Asaf Varol

Materials · 16.11.2026 · 19 (22) · 4856

DOI: 10.3390/ma19224856 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.11.2026. Verfasst von Ertuğrul Çelik und 7 weiteren Autor:innen. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fırat University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The combined effects of low AlSi12 additions on densification, mechanical properties and load-dependent wear in bulk NiCrBSi consolidated by spark plasma sintering (SPS) remain insufficiently established. This study evaluates AlSi12 as a metallic modifier to improve hardness and wear resistance while identifying associated flexural-strength trade-offs. Compositions containing 0, 2, 4, 6 and 8 wt.% AlSi12 were processed at 950 °C under 38 MPa for 240 s in nitrogen. Phase constitution, microstructure, density, hardness, bending strength and dry-sliding wear at 50 and 100 N were examined. The Ni-rich matrix remained dominant, with local Al enrichment. Experimental density decreased from 8.01 to 6.97 g/cm3, whereas nominal relative density was highest, at approximately 98.7–98.9%, for 4–6 wt.% AlSi12. The highest reported mean hardness was 581 HV at 6 wt.%, while the unmodified alloy reached the highest maximum nominal flexural stress in the displayed bending records. The lowest specific wear rates were approximately 2.6 × 10−5 and 2.9 × 10−5 mm3/(N·m) for 6 wt.% at 50 N and 8 wt.% at 100 N, respectively. These findings support composition selection based on the required balance of hardness, flexural strength and load-specific wear resistance.

Förderung

  • Fırat University

Zitieren

APA

Çelik, E., Donat, Y., Gurgenc, T., Korkmaz, M. E., Shahanaghi, E. S., Macit, C. K., Şeker, T. S., & Varol, A. (2026). Microstructural Evolution, Densification, and Mechanical–Tribological Performance of AlSi12-Modified NiCrBSi Composites Fabricated by Spark Plasma Sintering. Materials, 19(22), 4856. https://doi.org/10.3390/ma19224856

Vancouver

Çelik E, Donat Y, Gurgenc T, Korkmaz ME, Shahanaghi ES, Macit CK, et al. Microstructural Evolution, Densification, and Mechanical–Tribological Performance of AlSi12-Modified NiCrBSi Composites Fabricated by Spark Plasma Sintering. Materials. 2026;19(22):4856. doi:10.3390/ma19224856

BibTeX
@article{elik2026,
  author = {Çelik, Ertuğrul and Donat, Yusuf and Gurgenc, Turan and Korkmaz, Mehmet Erdi and Shahanaghi, Elshan Sefidgar and Macit, Cevher Kürsat and Şeker, Tarık Selçuk and Varol, Asaf},
  title = {Microstructural Evolution, Densification, and Mechanical–Tribological Performance of AlSi12-Modified NiCrBSi Composites Fabricated by Spark Plasma Sintering},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4856},
  doi = {10.3390/ma19224856}
}
Kostenlos starten →