Sintered High-Speed Steels—Manufacturing Methods and Their Influence on the Properties of the Sintered Material
Materials · 15.11.2026 · 19 (22) · 4838
DOI: 10.3390/ma19224838 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 15.11.2026. Verfasst von Maciej Jan Kupczyk und 2 weiteren Autor:innen. Die Arbeit nennt 87 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Poznań University of Technology.
Abstract (Originalsprache)
Cutting tools made from sintered high-speed steels have better cutting properties than tools made from conventional high-speed steels of a similar chemical composition when machining difficult-to-cut steels and at higher cutting speeds, especially in the presence of a cooling fluid. Due to their enhanced properties, which guarantee greater durability and reliability than conventional steels, sintered high-speed steels are primarily used for tools used in automated machining processes (in machining lines, on numerically controlled machine tools, or in machining centers). Many grades of sintered high-speed steels are produced, with varying chemical compositions selected depending on the machining conditions. As has been observed in industrial practice, the properties of sintered high-speed steels depend not only on their chemical composition but also on the manufacturing method. This paper describes the most well-known and most commonly used methods for producing sintered high-speed steels, assessing their cost of tool production, the cost-effectiveness of producing large- and small-sized tools, the cost-effectiveness of producing complex-shaped tools, the cost-effectiveness of use in mass and individual production, the suitability for producing tools operating under high static loads and in terms of high resistance to impact loads, and assessing the impact of the method on the properties of the sintered material.
Förderung
- Poznań University of Technology
Zitieren
APA
Kupczyk, M. J., Józwik, J., & Barszcz, M. (2026). Sintered High-Speed Steels—Manufacturing Methods and Their Influence on the Properties of the Sintered Material. Materials, 19(22), 4838. https://doi.org/10.3390/ma19224838
Vancouver
Kupczyk MJ, Józwik J, Barszcz M. Sintered High-Speed Steels—Manufacturing Methods and Their Influence on the Properties of the Sintered Material. Materials. 2026;19(22):4838. doi:10.3390/ma19224838
BibTeX
@article{Kupczyk2026,
author = {Kupczyk, Maciej Jan and Józwik, Jerzy and Barszcz, Marcin},
title = {Sintered High-Speed Steels—Manufacturing Methods and Their Influence on the Properties of the Sintered Material},
journal = {Materials},
year = {2026},
volume = {19},
number = {22},
pages = {4838},
doi = {10.3390/ma19224838}
}
EUVIMED