EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers

Roberto Simonelli, Antonio D’Angelo, Luigi Vertuccio, Luigi Mollo, Davide Nonis, Sara Fasana, Marco Zerbinatti, Michelina Catauro

Materials · 12.11.2026 · 19 (22) · 4804

DOI: 10.3390/ma19224804 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.11.2026. Verfasst von Roberto Simonelli und 7 weiteren Autor:innen. Die Arbeit nennt 65 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The stone industry generates a large amount of sawing sludge (SS). Geopolymers (GPs) offer a circular pathway by incorporating SS into their aluminosilicate networks, helping to mitigate the environmental impact on the construction industry. This preliminary study addresses the feasibility of using four types of SS (SS1–SS4) in metakaolin-based GP formulation, evaluating the effect of two granulometries (75 µm < x < 125 µm and 125 µm < x < 300 µm) on GP properties. Geopolymerization is confirmed through Fourier-transform infrared (FT-IR) spectroscopy, while integrity and boiling water tests confirm that all samples maintained their integrity under the selected preliminary experimental conditions. Microstructural and mineralogical characteristics, investigated by scanning electron microscopy (SEM) and wide-angle X-ray diffraction (WAXD), respectively, reveal heterogeneous microstructures characterized by the presence of unreacted crystalline particles. Thermal behavior, examined through thermogravimetric analysis (TGA) and derivative thermogravimetry (DTG), reveals total mass losses of approximately 15–18% up to 1000 °C, with an additional loss in the 500–800 °C range associated with carbonate decomposition, which is particularly evident in SS2, GP2/1, and GP2/2. Mechanical properties, through compressive strength tests, reveal higher values for GP2/1 (24.1 ± 0.4 MPa) and GP4/2 (24.7 ± 1.7 MPa) than for the GP0 control (22.5 ± 0.2 MPa). These preliminary findings support further investigations concerning the use of sawing sludges as fillers in sustainable alkali-activated materials.

Zitieren

APA

Simonelli, R., D’Angelo, A., Vertuccio, L., Mollo, L., Nonis, D., Fasana, S., Zerbinatti, M., & Catauro, M. (2026). Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers. Materials, 19(22), 4804. https://doi.org/10.3390/ma19224804

Vancouver

Simonelli R, D’Angelo A, Vertuccio L, Mollo L, Nonis D, Fasana S, et al. Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers. Materials. 2026;19(22):4804. doi:10.3390/ma19224804

BibTeX
@article{Simonelli2026,
  author = {Simonelli, Roberto and D’Angelo, Antonio and Vertuccio, Luigi and Mollo, Luigi and Nonis, Davide and Fasana, Sara and Zerbinatti, Marco and Catauro, Michelina},
  title = {Effect of Granulometry of Sawing Sludges Entrapped in Metakaolin-Based Geopolymers},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {22},
  pages = {4804},
  doi = {10.3390/ma19224804}
}
Kostenlos starten →