EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers

Jasmine Aschoff, Stephan Partschefeld iD, Jens Schneider, Andrea Osburg

Materials · 18.01.2024 · 17 (2) · 463

DOI: 10.3390/ma17020463 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 18.01.2024. Verfasst von Jasmine Aschoff und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Construction Chemistry and Polymer Materials, F. A. Finger-Institute for Building Material Engineering, Bauhaus-Universität Weimar, 994…. Die Arbeit wurde bisher 18-mal zitiert (Crossref) und nennt 43 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: German Federal Ministry for Economics and Climate Action.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This paper deals with the influence of microwaves on the hardening and curing of geopolymer binders synthesized from metakaolin or aluminum orthophosphate with sodium silicate solution as the activator. Pure geopolymer pastes as well as geopolymer mortars were considered. The variable parameters were the modulus of the sodium silicate solutions (molar ratio of SiO2 to Na2O: 1.5, 2.0 and 2.5) and the Si/Al ratio (3/1 and 2/1). Selected samples were cured in a microwave oven until hardening, so the curing time depended on the mixture. For comparison some samples were cured at ambient temperature. To investigate the influence of microwave radiation on the reaction kinetics, isothermal heat flow calorimetry, ultrasonic velocity measurements and rheological investigations into the variation of curing temperature were used. In addition, the mechanical properties of the cured samples were characterized. The results show that microwave curing only takes a few minutes, so it is the most time-saving method. Key factors influencing the geopolymer reaction under microwave radiation are the raw materials as well as the Si/Al ratio. Metakaolin-based geopolymer binders are more stable than those based on aluminum orthophosphate, especially regarding their salt efflorescence. Microwave radiation is an efficient method to accelerate the geopolymer reaction.

Schlagwörter

Stichwörter der Autor:innen

aluminum orthophosphategeopolymermetakaolinmicrowave treatmentsodium silicate solution

Autor:innen und Institutionen

  • Department of Construction Chemistry and Polymer Materials, F. A. Finger-Institute for Building Material Engineering, Bauhaus-Universität Weimar, 99423 Weimar, Germany.

ORCID-Profile: Stephan Partschefeld

Förderung

  • German Federal Ministry for Economics and Climate Action

Zitieren

APA

Aschoff, J., Partschefeld, S., Schneider, J., & Osburg, A. (2024). Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers. Materials, 17(2), 463. https://doi.org/10.3390/ma17020463

Vancouver

Aschoff J, Partschefeld S, Schneider J, Osburg A. Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers. Materials. 2024;17(2):463. doi:10.3390/ma17020463

BibTeX
@article{Aschoff2024,
  author = {Aschoff, Jasmine and Partschefeld, Stephan and Schneider, Jens and Osburg, Andrea},
  title = {Effect of Microwaves on the Rapid Curing of Metakaolin- and Aluminum Orthophosphate-Based Geopolymers},
  journal = {Materials},
  year = {2024},
  volume = {17},
  number = {2},
  pages = {463},
  doi = {10.3390/ma17020463}
}
Kostenlos starten →