Comparative Evaluation of Oscillating Fiber Laser Welding and GMAW/MAG for SAE 1010 Agricultural Wheel Rims
Materials · 08.11.2026 · 19 (21) · 4746
DOI: 10.3390/ma19214746 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 08.11.2026. Verfasst von Willian Queiroz und 3 weiteren Autor:innen. Beteiligte Einrichtung: Postgraduate Program in Design and Manufacturing Processes (PPGPPF), Department of Mechanical Engineering, University of Passo Fundo (UPF), Br 285 km…. Die Arbeit nennt 37 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).
Abstract (Originalsprache)
This study evaluates oscillating fiber laser welding as an alternative to gas metal arc welding with an active shielding gas (GMAW/MAG) for manufacturing 4.25 mm thick SAE 1010 agricultural wheel rims. A systematic product development approach guided technology selection. The comparison included process energy, weld geometry, microstructure, grain size, Vickers microhardness, guided-bend testing, and industrial forming. Estimated GMAW/MAG heat input was 0.64 kJ/mm, whereas nominal incident laser energy was 0.019 kJ/mm; these quantities do not represent equivalent measurements of absorbed heat. Measurements from one transverse cross-section per welding condition showed a smaller weld-face width (5.70 vs. 12.97 mm), lower convexity (0.56 versus 3.93 mm), and a narrower heat-affected zone (0.85 versus 2.10 mm) for laser welding compared with GMAW/MAG. Less grain coarsening was observed in the laser-welded heat-affected zone. Mean fusion-zone hardness was 158.6 ± 18.9 HV1 for laser welding and 190.4 ± 11.0 HV1 for GMAW/MAG. Both conditions passed the guided-bend tests. All ten laser-welded specimens completed industrial forming, whereas two of ten GMAW/MAG specimens fractured during cone opening. The examined laser-welded cross-section exhibited a narrower weld profile than the examined GMAW/MAG cross-section. The laser-welding manufacturing route also eliminated the post-weld grinding operation under the investigated conditions.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Postgraduate Program in Design and Manufacturing Processes (PPGPPF), Department of Mechanical Engineering, University of Passo Fundo (UPF), Br 285 km 292, Passo Fundo 99052-900, Brazil.
- Escuela de Ingeniería Mecánica, Pontificia Universidad Católica de Valparaíso, Av. Los Carrera 01567, Quilpué 2430000, Chile.
- Departamento de Ingeniería en Obras Civiles, Universidad de La Frontera, Temuco 4811230, Chile.
ORCID-Profile: Francisco Briones, Carola Martínez
Zitieren
APA
Queiroz, W., Briones, F., Martínez, C., & Haupt, W. (2026). Comparative Evaluation of Oscillating Fiber Laser Welding and GMAW/MAG for SAE 1010 Agricultural Wheel Rims. Materials, 19(21), 4746. https://doi.org/10.3390/ma19214746
Vancouver
Queiroz W, Briones F, Martínez C, Haupt W. Comparative Evaluation of Oscillating Fiber Laser Welding and GMAW/MAG for SAE 1010 Agricultural Wheel Rims. Materials. 2026;19(21):4746. doi:10.3390/ma19214746
BibTeX
@article{Queiroz2026,
author = {Queiroz, Willian and Briones, Francisco and Martínez, Carola and Haupt, William},
title = {Comparative Evaluation of Oscillating Fiber Laser Welding and GMAW/MAG for SAE 1010 Agricultural Wheel Rims},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4746},
doi = {10.3390/ma19214746}
}
EUVIMED