Simulation and process analysis of laser oscillating welding of aluminum alloys
Journal of Laser Applications · 01.05.2026 · 38 (2)
DOI: 10.2351/7.0001973 ↗Kurz gefasst
Fachartikel in der Zeitschrift Journal of Laser Applications, online erschienen am 20.04.2026. Verfasst von Yazhou Jia und 5 weiteren Autor:innen. Die Arbeit wurde bisher 1-mal zitiert (Crossref) und nennt 30 Literaturangaben. Gefördert von: Natural Science Foundation of China, Hebei Natural Science Foundation for Excellent Young Scholars, Central guidance for local scientific and technological development funding projects.
Abstract (Originalsprache)
This study investigates the laser oscillating welding process applied to 2 mm-thick 5052 aluminum alloys. The ANSYS Welding software is employed to simulate and calculate the temperature field under various welding parameters, including welding speed, swing frequency, swing mode, and defocusing amount. The simulation results are subsequently validated through experimental testing. Using a high-speed camera to dynamically analyze the plasma morphology and melt pool flow behavior under different oscillating modes, establish a finite element model to simulate the welding process and analyze the influence mechanism of the combination of process parameters on the weld seam forming. The study shows that the circular oscillating suitability is excellent; when the welding speed is 10 mm/s, the heat input is suitable, and there is no weld fusion and no weld penetration; At a laser defocusing amount of −2 mm, it can guarantee the stability of the depth of fusion and avoid the heat input is too large; when the laser frequency is increased to 60–65 Hz, the molten pool stirring effect is enhanced due to the increase in the frequency, which improves the uniformity of weld bead. The optimal parameter combination is determined through process analysis, test verification, and optimization simulation results.
Förderung
- Natural Science Foundation of China
- Hebei Natural Science Foundation for Excellent Young Scholars
- Central guidance for local scientific and technological development funding projects
Zitieren
APA
Jia, Y., Qu, S., Chen, Y., Zeng, R., Ling, Q., & Huang, N. (2026). Simulation and process analysis of laser oscillating welding of aluminum alloys. Journal of Laser Applications, 38(2). https://doi.org/10.2351/7.0001973
Vancouver
Jia Y, Qu S, Chen Y, Zeng R, Ling Q, Huang N. Simulation and process analysis of laser oscillating welding of aluminum alloys. Journal of Laser Applications. 2026;38(2). doi:10.2351/7.0001973
BibTeX
@article{Jia2026,
author = {Jia, Yazhou and Qu, Shilong and Chen, Yunjing and Zeng, Ruchuan and Ling, Qiang and Huang, Ning},
title = {Simulation and process analysis of laser oscillating welding of aluminum alloys},
journal = {Journal of Laser Applications},
year = {2026},
volume = {38},
number = {2},
doi = {10.2351/7.0001973}
}
EUVIMED