EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Microstructure, Corrosion Resistance and Mechanical Properties of Dissimilar Welded Austenitic, Super-Austenitic and Duplex Stainless Steels

Isidoros Iakovidis iD, Stavros Chionopoulos iD, Ioannis Rachoutis

Materials · 29.10.2026 · 19 (21) · 4583

DOI: 10.3390/ma19214583 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Isidoros Iakovidis und 2 weiteren Autor:innen. Beteiligte Einrichtung: Department of Naval Architecture, University of West Attica, 12243 Athens, Greece. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: University of West Attica.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study aimed to comparatively evaluate the microstructural characteristics, mechanical properties, and localized corrosion resistance of three dissimilar stainless-steel joints: 254 SMO® (UNS S31254)–310S (UNS S31008), 254 SMO® (UNS S31254)–2205 (UNS S32205), and 310S (UNS S31008)–2205 (UNS S32205). The joints were produced by gas tungsten arc welding (GTAW) using ERNiCrMo-3 filler metal and were investigated through macrostructural examination, SEM–EDS analysis, microhardness measurements, transverse tensile testing, and ASTM G48 corrosion testing. All three combinations produced fully penetrated welds without visible macroscopic discontinuities. SEM–EDS revealed Fe–Ni gradients across the fusion boundaries, consistent with local dilution of the Ni-based filler metal, together with Nb–Mo-rich interdendritic constituents and discrete Ti–Nb-rich particles in the weld metal. The 254 SMO–310S joint exhibited the highest tensile strength and elongation (776 MPa and 43.6%), followed by 254 SMO–2205 (742 MPa and 27.7%), with both fracturing outside the weld zone. The 310S–2205 joint showed lower strength and ductility (578 MPa and 12.3%) and fractured within the welded region. ASTM G48 testing showed low mass losses and no pronounced preferential attack of the weld metal or heat-affected zones. ERNiCrMo-3 produced sound dissimilar joints in all three material combinations, although their microstructural, mechanical, and corrosion responses differed with the adjoining base metals.

Schlagwörter

Stichwörter der Autor:innen

2205 duplex254 SMO310SERNiCrMo-3dissimilar stainless-steel weldingmicrostructurepitting corrosiontensile properties

Autor:innen und Institutionen

  • Department of Naval Architecture, University of West Attica, 12243 Athens, Greece.

ORCID-Profile: Isidoros Iakovidis, Stavros Chionopoulos

Förderung

  • University of West Attica

Zitieren

APA

Iakovidis, I., Chionopoulos, S., & Rachoutis, I. (2026). Microstructure, Corrosion Resistance and Mechanical Properties of Dissimilar Welded Austenitic, Super-Austenitic and Duplex Stainless Steels. Materials, 19(21), 4583. https://doi.org/10.3390/ma19214583

Vancouver

Iakovidis I, Chionopoulos S, Rachoutis I. Microstructure, Corrosion Resistance and Mechanical Properties of Dissimilar Welded Austenitic, Super-Austenitic and Duplex Stainless Steels. Materials. 2026;19(21):4583. doi:10.3390/ma19214583

BibTeX
@article{Iakovidis2026,
  author = {Iakovidis, Isidoros and Chionopoulos, Stavros and Rachoutis, Ioannis},
  title = {Microstructure, Corrosion Resistance and Mechanical Properties of Dissimilar Welded Austenitic, Super-Austenitic and Duplex Stainless Steels},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4583},
  doi = {10.3390/ma19214583}
}
Kostenlos starten →