EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Biochar and Activated Carbon as Formaldehyde Scavengers in Particleboards: A Technical and Environmental Assessment

Hossein Mazaheri iD, Papiya Bhowmik iD, Brijesh Mainali iD, Reza Hosseinpourpia iD

Materials · 29.10.2026 · 19 (21) · 4571

DOI: 10.3390/ma19214571 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Hossein Mazaheri und 3 weiteren Autor:innen. Beteiligte Einrichtung: Department of Micro and Nanotechnology, Middle East Technical University, Ankara 06800, Türkiye. Die Arbeit nennt 53 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0).

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Activated carbon (AC) and biochar (BC) were incorporated into urea–melamine–formaldehyde (UmF) adhesive at 0.5, 1.0, and 2.0 wt% of adhesive solids to investigate their effects on particleboard performance. This study directly compares AC and BC in the same UmF-bonded particleboard system, combining measurements of formaldehyde release and technical performance with life cycle assessment and exploratory performance-based annualization. Compared with the control, boards containing 1.0% BC exhibited approximately 18% higher mean internal bond strength and 11% lower mean formaldehyde release, while 0.5% BC exhibited approximately 33% higher mean modulus of rupture. AC at 2.0% reduced mean 24 h thickness swelling by approximately 21%. Increasing BC loading to 2.0% did not improve formaldehyde control and slightly increased mean release. These experimental trends indicate that additive selection involves trade-offs rather than uniform improvements across properties. Baseline LCA results showed small differences in impacts per cubic metre of board. Under the assumed service-life model, equal weighting of the selected technical properties, and an equal-raw-impact assumption, BC2 yielded approximately 14% lower annualized impacts than the control. This modeled reduction does not establish an actual extension of service life. The combined assessment highlights the need to distinguish measured performance from assumption-dependent environmental rankings when selecting carbon-based additives.

Schlagwörter

Stichwörter der Autor:innen

greener particleboardlife cycle assessmentmechanical propertiesthickness swellingurea–melamine–formaldehyde

Autor:innen und Institutionen

  • Department of Micro and Nanotechnology, Middle East Technical University, Ankara 06800, Türkiye.
  • Department of Forestry and Wood Technology, Linnaeus University, 351 95 Växjö, Sweden.
  • Department of Built Environment and Energy Technology, Linnaeus University, 351 95 Växjö, Sweden.
  • Linnaeus University Centre for Competitive Timber Structures, Linnaeus University, 351 95 Växjö, Sweden.
  • College of Forest Resources and Environmental Science, Michigan Technological University, Houghton, MI 49931, USA.

ORCID-Profile: Hossein Mazaheri, Papiya Bhowmik, Brijesh Mainali, Reza Hosseinpourpia

Zitieren

APA

Mazaheri, H., Bhowmik, P., Mainali, B., & Hosseinpourpia, R. (2026). Biochar and Activated Carbon as Formaldehyde Scavengers in Particleboards: A Technical and Environmental Assessment. Materials, 19(21), 4571. https://doi.org/10.3390/ma19214571

Vancouver

Mazaheri H, Bhowmik P, Mainali B, Hosseinpourpia R. Biochar and Activated Carbon as Formaldehyde Scavengers in Particleboards: A Technical and Environmental Assessment. Materials. 2026;19(21):4571. doi:10.3390/ma19214571

BibTeX
@article{Mazaheri2026,
  author = {Mazaheri, Hossein and Bhowmik, Papiya and Mainali, Brijesh and Hosseinpourpia, Reza},
  title = {Biochar and Activated Carbon as Formaldehyde Scavengers in Particleboards: A Technical and Environmental Assessment},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4571},
  doi = {10.3390/ma19214571}
}
Kostenlos starten →