Activated corn stalk biochar as a porous carbon electrode for supercapacitors
Bioresource Technology · 2027-02 · 465 · 136131
DOI: 10.1016/j.biortech.2026.136131 ↗Kurz gefasst
Fachartikel in der Zeitschrift Bioresource Technology, 2027-02. Verfasst von Damla Kökmen und 5 weiteren Autor:innen. Beteiligte Einrichtung: Chemical Engineering Department, Istanbul Technical University, Maslak, Istanbul, Turkey. Die Arbeit nennt 38 Literaturangaben. Gefördert von: Istanbul Technical University Scientific Research Projects Coordination Unit, The Scientific and Technological Research Council of Türkiye.
Abstract (Originalsprache)
Corn stalk (CS), a renewable and sustainable agricultural waste, was used to produce electrode materials for supercapacitors. CS was first pre-carbonized at 600°C under nitrogen and then activated with potassium hydroxide (KOH) at biochar:KOH mass ratios of 1:1‒1:4 and temperatures of 600-900°C. The activated biochars were characterized by Fourier transform infrared spectroscopy (FTIR), Brunauer-Emmett-Teller surface area (BET), scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), X-Ray diffraction (XRD), and Raman spectroscopy. The materials exhibited micropore-rich hierarchical porous structures with specific surface areas ranging from 1178‒2998 m2 g-1 and ID/IG ratios ranged in 0.77 to 1.11. Eight different electrodes were prepared using the biochars, carbon black, and polyvinylidene fluoride (PVDF) at a weight ratio of 8:1:1. Electrochemical performance was evaluated by cyclic voltammetry (CV), galvanostatic charge-discharge (GCD) and electrochemical impedance spectrometry (EIS) techniques in three- and two-electrode systems (reference electrode: Ag/AgCl, counter electrode:Pt. electrolyte: 6 M KOH in three-electrode configuration). CS-800-K2, activated at 800°C with biochar:KOH mass ratio of 1:2, exhibited the best electrochemical performance, with a specific capacitance of 220 F g-1 at 0.5 A g-1 in three-electrode system. The electrode retained 105% of its capacitance after 7500 cycles. In a symmetric two-electrode configuration, CS-800-K2 delivered 124F g-1at 0.5 A g-1, with a maximum energy density of 4 Wh kg-1 and a maximum power density of 553 W kg-1. These results demonstrate the potential of corn-stalk-derived activated biochar as a low-cost, sustainable electrode material for supercapacitors.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Chemical Engineering Department, Istanbul Technical University, Maslak, Istanbul, Turkey.
- Physics Engineering Department, Istanbul Technical University, Maslak, Istanbul, Turkey.
- Chemical Engineering Department, Istanbul Technical University, Maslak, Istanbul, Turkey. Electronic address: nil.ozbek@itu.edu.tr.
Förderung
- Istanbul Technical University Scientific Research Projects Coordination Unit
- The Scientific and Technological Research Council of Türkiye
Zitieren
APA
Kökmen, D., Yılmaz, A., Gelir, A., Özbek, N., Haykırı-Açma, H., & Yaman, S. (2027). Activated corn stalk biochar as a porous carbon electrode for supercapacitors. Bioresource Technology, 465, 136131. https://doi.org/10.1016/j.biortech.2026.136131
Vancouver
Kökmen D, Yılmaz A, Gelir A, Özbek N, Haykırı-Açma H, Yaman S. Activated corn stalk biochar as a porous carbon electrode for supercapacitors. Bioresource Technology. 2027;465:136131. doi:10.1016/j.biortech.2026.136131
BibTeX
@article{Kkmen2027,
author = {Kökmen, Damla and Yılmaz, Anıl and Gelir, Ali and Özbek, Nil and Haykırı-Açma, Hanzade and Yaman, Serdar},
title = {Activated corn stalk biochar as a porous carbon electrode for supercapacitors},
journal = {Bioresource Technology},
year = {2027},
volume = {465},
pages = {136131},
doi = {10.1016/j.biortech.2026.136131}
}
EUVIMED