EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Machine-Learning-Assisted Design of Powder-Metallurgy Ti-Al-Nb Alloys Through Rare-Earth Microalloying: Microstructure and Mechanical Properties

Xinze Li, Qilin Yu, Guoqing Xia, Xifeng Yan, Zhu Li, Chaoqun Luo, Qi Wang, Yaran Zhang, Qi Cai iD

Materials · 29.10.2026 · 19 (21) · 4568

DOI: 10.3390/ma19214568 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 29.10.2026. Verfasst von Xinze Li und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China. Die Arbeit nennt 48 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, Science and Technology Project of Hebei Education Department.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

Powder-metallurgy (PM) Ti-Al-Nb alloys are attractive for high-temperature structural applications but remain limited by poor room-temperature ductility. This study combines an exploratory machine-learning (ML) analysis with rare-earth (RE; La and Ce) microalloying to examine relationships among composition, thermal response, microstructure, and tensile properties. The ML dataset comprised 30 in-house Ti-Al-Nb experimental records. Four differential scanning calorimetry (DSC) descriptors—the peak areas and peak temperatures in the 800–900 °C and 1000–1100 °C ranges—were used to predict room-temperature yield strength. Six regression algorithms were compared using a 70/30 train–test split and five-fold cross-validation during hyperparameter selection. The gradient boosting model achieved the best test performance (R2 = 0.8752; MSE = 0.0089 on the normalized response). The model was used as a screening and interpretation aid rather than as a direct optimizer of the final sintering condition; the 1400 °C/3 h sintering schedule was an established process from prior laboratory work. For Ti-22Al-(25 − x)Nb-xRE alloys (x = 0–2 at.%), RE addition produced RE2O3-containing microstructures, reduced the mean grain size from 51.6 to 18.1 μm, and narrowed the O-phase laths from about 0.55 to 0.19 μm. At room temperature, the highest peak true stress was 572 MPa at 1.0 at.% RE, whereas the largest true fracture strain was 0.63% at 1.5 at.% RE. At 600 °C, the highest strength was 634 MPa at 0.5 at.% RE, while the largest true fracture strain was 0.98% at 1.5 at.% RE. Accordingly, 1.5 at.% RE provides the best overall strength–ductility balance across both test temperatures, although it does not maximize every individual property. The observed trends are consistent with a proposed RE–O redistribution and particle-pinning mechanism, but direct quantitative oxygen analysis and high-resolution phase mapping were not available; mechanistic statements are therefore treated as evidence-supported interpretations rather than definitive proof.

Schlagwörter

Stichwörter der Autor:innen

Ti-Al-Nb alloymachine learningmechanical propertiesoxygen redistributionpowder metallurgyrare-earth microalloying

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Beijing Institute of Technology, Beijing 100081, China.
  • Tianjin Key Laboratory of Integrated Design and On-Line Monitoring for Light Industry & Food Machinery and Equipment, School of Mechanical Engineering, Tianjin University of Science and Technology, Tianjin 300457, China.
  • Material Science Research Center, Xingtai University, Xingtai 054001, China.

ORCID-Profile: Qi Cai

Förderung

  • National Natural Science Foundation of China
  • Science and Technology Project of Hebei Education Department

Zitieren

APA

Li, X., Yu, Q., Xia, G., Yan, X., Li, Z., Luo, C., Wang, Q., Zhang, Y., & Cai, Q. (2026). Machine-Learning-Assisted Design of Powder-Metallurgy Ti-Al-Nb Alloys Through Rare-Earth Microalloying: Microstructure and Mechanical Properties. Materials, 19(21), 4568. https://doi.org/10.3390/ma19214568

Vancouver

Li X, Yu Q, Xia G, Yan X, Li Z, Luo C, et al. Machine-Learning-Assisted Design of Powder-Metallurgy Ti-Al-Nb Alloys Through Rare-Earth Microalloying: Microstructure and Mechanical Properties. Materials. 2026;19(21):4568. doi:10.3390/ma19214568

BibTeX
@article{Li2026,
  author = {Li, Xinze and Yu, Qilin and Xia, Guoqing and Yan, Xifeng and Li, Zhu and Luo, Chaoqun and Wang, Qi and Zhang, Yaran and Cai, Qi},
  title = {Machine-Learning-Assisted Design of Powder-Metallurgy Ti-Al-Nb Alloys Through Rare-Earth Microalloying: Microstructure and Mechanical Properties},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {21},
  pages = {4568},
  doi = {10.3390/ma19214568}
}
Kostenlos starten →