An Integrated Performance-Based Screening Framework for Fiber-Reinforced Concrete Floating Dock Blocks for Offshore Renewable Energy Applications
Materials · 28.10.2026 · 19 (21) · 4533
DOI: 10.3390/ma19214533 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 28.10.2026. Verfasst von Kasra Hosseinmostofi und 4 weiteren Autor:innen. Beteiligte Einrichtung: Institute for Sustainability and Innovation in Structural Engineering, Department of Civil Engineering, School of Engineering, University of Minho, 4…. Die Arbeit nennt 38 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Fundação para a Ciência e Tecnologia, European Regional Development Fund.
Abstract (Originalsprache)
Selecting fiber-reinforced concrete (FRC) for thin marine shells is a multi-constraint decision because lower cradle-to-gate global warming potential (GWP) at equal volume may be offset by post-cracking requirements, interface behavior, impact response, or detailing. This study introduces a performance-constrained, multi-evidence screening framework and illustrates it with traceable mechanical, fiber-field, marine-bond, impact, and life-cycle datasets for four self-compacting concrete systems with 90 kg/m3 of industrial and/or recycled steel fibers. Unlike a compensatory environmental–mechanical index, the framework applies simultaneous normalized response constraints, independent interface and component gates, deterministic ranking-sensitivity analysis, and component carbon-parity budgets. Compressive strengths were 60.03–66.10 MPa, whereas post-cracking properties varied substantially. At 80% retained performance, beam work favors I30R60, whereas an additional 3 mm splitting constraint favors I45R45. For a 0.144 m3 panel, I45R45 has 3.89 kg CO2-eq less reported cradle-to-gate GWP than I90R0, corresponding to only 5.50% additional concrete before carbon parity under the source inventory. Results depend on published means and inventory assumptions. The four documented 4.0 m impact tests (one slab per tested composition) illustrate the component gate as a proof of concept rather than a statistically supported pass/fail criterion. Replicated component testing and project-specific verification are required before design qualification.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Institute for Sustainability and Innovation in Structural Engineering, Department of Civil Engineering, School of Engineering, University of Minho, 4800-058 Guimarães, Portugal.
- DIS/CREADIS, Ørstedsvej 10, Stilling, DK-8660 Skanderborg, Denmark.
ORCID-Profile: Kasra Hosseinmostofi, Fatemeh Soltanzadeh, Ali Edalat-Behbahani, Isabel B Valente, Eduardo N B Pereira
Förderung
- Fundação para a Ciência e Tecnologia
- European Regional Development Fund
Zitieren
APA
Hosseinmostofi, K., Soltanzadeh, F., Edalat-Behbahani, A., Valente, I. B., & Pereira, E. N. B. (2026). An Integrated Performance-Based Screening Framework for Fiber-Reinforced Concrete Floating Dock Blocks for Offshore Renewable Energy Applications. Materials, 19(21), 4533. https://doi.org/10.3390/ma19214533
Vancouver
Hosseinmostofi K, Soltanzadeh F, Edalat-Behbahani A, Valente IB, Pereira ENB. An Integrated Performance-Based Screening Framework for Fiber-Reinforced Concrete Floating Dock Blocks for Offshore Renewable Energy Applications. Materials. 2026;19(21):4533. doi:10.3390/ma19214533
BibTeX
@article{Hosseinmostofi2026,
author = {Hosseinmostofi, Kasra and Soltanzadeh, Fatemeh and Edalat-Behbahani, Ali and Valente, Isabel B and Pereira, Eduardo N B},
title = {An Integrated Performance-Based Screening Framework for Fiber-Reinforced Concrete Floating Dock Blocks for Offshore Renewable Energy Applications},
journal = {Materials},
year = {2026},
volume = {19},
number = {21},
pages = {4533},
doi = {10.3390/ma19214533}
}
EUVIMED