Mechanical Properties and Energy Absorption Characteristics of Ring Lattice Sandwich Structures Under Compressive Load
Materials · 19.08.2026 · 19 (16) · 3520
DOI: 10.3390/ma19163520 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 19.08.2026. Verfasst von Wenkang Wang und 3 weiteren Autor:innen. Beteiligte Einrichtung: Joint Logistics Support Force University of Engineering, Chongqing 401311, China. Die Arbeit nennt 32 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Chongqing Science and Technology Commission.
Abstract (Originalsprache)
To enhance critical infrastructure protection against low-cost UAV impacts, this study proposes a novel ring lattice sandwich structure (RLSS) fabricated via an economical interlocking-assembly-brazing method. Its quasi-static compressive behavior is systematically investigated through experiments, numerical simulations, and theoretical analysis. Theoretical models for relative density and initial yield stress are validated against experiments, with errors of 7.1% and 6.6%, respectively. Quasi-static tests show that the one-layer RLSS exhibits a specific energy absorption (SEA) of 8.67 J/g, while the two-layer structure drops to 5.66 J/g due to inter-layer torsional instability. SHPB impact tests at strain rates of 750–1369 s−1 demonstrate a pronounced strain-rate effect, with dynamic increase factors ranging from 1.14 to 1.43. Numerical simulations accurately reproduce the experimental deformation modes and reveal that multi-layer (2–5 layers) RLSSs reduce SEA by 46.9% compared with the one-layer simulated value of 9.43 J/g. Adding a 0.3-mm inner panel in simulations restores the crushing mode and raises the SEA of the two-layer structure to 7.19 J/g, surpassing the non-panel counterpart (6.03 J/g). Hybrid core configurations provide additional advantages: Mode I (ring–pyramid with inner panel) enhances total energy absorption with a limited ring-layer count, while Mode II (alternating layers) achieves minimal plateau stress fluctuation (PSF = 0.09). These findings confirm that the proposed RLSS, especially when optimized with thin inner panels or hybrid designs, offers great potential as protective cladding against impact and blast threats.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- Joint Logistics Support Force University of Engineering, Chongqing 401311, China.
- Defense Engineering Institute, Academy of Military Science, PLA, Luoyang 471000, China.
- Air Force Engineering University, Xi'an 710038, China.
ORCID-Profile: Xinsheng Jiang, Yu Liao, Zhenhua Tian
Förderung
- Chongqing Science and Technology Commission
Zitieren
APA
Wang, W., Jiang, X., Liao, Y., & Tian, Z. (2026). Mechanical Properties and Energy Absorption Characteristics of Ring Lattice Sandwich Structures Under Compressive Load. Materials, 19(16), 3520. https://doi.org/10.3390/ma19163520
Vancouver
Wang W, Jiang X, Liao Y, Tian Z. Mechanical Properties and Energy Absorption Characteristics of Ring Lattice Sandwich Structures Under Compressive Load. Materials. 2026;19(16):3520. doi:10.3390/ma19163520
BibTeX
@article{Wang2026,
author = {Wang, Wenkang and Jiang, Xinsheng and Liao, Yu and Tian, Zhenhua},
title = {Mechanical Properties and Energy Absorption Characteristics of Ring Lattice Sandwich Structures Under Compressive Load},
journal = {Materials},
year = {2026},
volume = {19},
number = {16},
pages = {3520},
doi = {10.3390/ma19163520}
}
EUVIMED