EUVIMEDEUVIMED entdecken
Crossref

Energy absorption and deformation characteristics of eight SLS-manufactured PA12 lattice structures under an intermediate compressive load rate

Osama Abdelaal, Saleh Aldahash

Materials Testing · 25.11.2025 · 67 (11) · 1845-1859

DOI: 10.1515/mt-2025-0191 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials Testing, online erschienen am 17.10.2025. Verfasst von Osama Abdelaal und 1 weiteren Autor:innen. Die Arbeit wurde bisher 4-mal zitiert (Crossref) und nennt 59 Literaturangaben. Gefördert von: Majmaah University.

AbstractBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The mechanical response of additively manufactured (AM) lattice structures (LSs) under intermediate loading rates is crucial for real-world applications involving loading rates between quasi-static and high-speed impacts. Testing AM LSs in this regime ensures that the mechanical response aligns with operational conditions. Furthermore, powder entrapment within AM-processed LSs can change their effective porosity, consequently changing their targeted properties. This research aims to investigate the effects of an intermediate load rate and entrapped powder on the compressive behaviour and energy absorption characteristics of four strut-based LSs, namely, BCC, IsoTruss, Octet, and Diamond, and four sheet-based triply periodic minimal surfaces (TPMS) LSs, namely, Schwarz Primitive, Gyroid, Schwarz Diamond, and Split-P, manufactured by SLS from PA12 powder. Strut-based LSs exhibited minimal powder entrapment, while TPMS LSs had increased density from excessive trapped powder. Under intermediate loading, the strut-based lattices, except for IsoTruss, failed catastrophically. In contrast, imperfectly cleaned TPMS LSs exhibited remarkable stiffness, and higher compressive plasticity resulted in high load absorption capacity under intermediate load as the entrapped powder worked as a secondary control of energy storage and stiffness. These findings provide valuable insights into the impact of intermediate loading and entrapped powder on the energy absorption characteristics of SLSed PA12 LSs.

Förderung

  • Majmaah University

Zitieren

APA

Abdelaal, O., & Aldahash, S. (2025). Energy absorption and deformation characteristics of eight SLS-manufactured PA12 lattice structures under an intermediate compressive load rate. Materials Testing, 67(11), 1845-1859. https://doi.org/10.1515/mt-2025-0191

Vancouver

Abdelaal O, Aldahash S. Energy absorption and deformation characteristics of eight SLS-manufactured PA12 lattice structures under an intermediate compressive load rate. Materials Testing. 2025;67(11):1845-1859. doi:10.1515/mt-2025-0191

BibTeX
@article{Abdelaal2025,
  author = {Abdelaal, Osama and Aldahash, Saleh},
  title = {Energy absorption and deformation characteristics of eight SLS-manufactured PA12 lattice structures under an intermediate compressive load rate},
  journal = {Materials Testing},
  year = {2025},
  volume = {67},
  number = {11},
  pages = {1845--1859},
  doi = {10.1515/mt-2025-0191}
}
Kostenlos starten →