EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Evaluation of Microstructure and Mechanical Properties of T6 Heat-Treated Al-Cu-Mg Aluminum Alloy Based on Laser Ultrasonics

Chaochao Chen, Zhi Xu, Anmin Yin

Materials · 12.08.2026 · 19 (16) · 3423

DOI: 10.3390/ma19163423 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 12.08.2026. Verfasst von Chaochao Chen und 2 weiteren Autor:innen. Beteiligte Einrichtung: Beijing University of Science and Technology Design and Research Institute Co., Ltd., Beijing 100083, China. Die Arbeit nennt 29 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Zhejiang Provincial Natural Science Foundation, Projects in Science and Technique Plans of Ningbo City, Natural Science Foundation of Zhejiang Province.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

At present, the detection methods for the microstructure and mechanical properties of aluminum alloys are mainly based on SEM, EBSD, TEM, tensile tests, and microhardness tests, which are time-consuming and destructive. In this paper, laser ultrasonic non-destructive detection is employed to obtain ultrasonic signals from Al-Cu-Mg aluminum alloy subjected to various heat treatment processes. The results reveal empirical correlations between the characteristic values of the ultrasonic signals and the material’s state. Specifically, the characteristic values exhibit an inverse correlation with the precipitated phase content. When both the precipitated phase content and the average grain size vary significantly, distinct deviations in the characteristic values are observed, which can serve as indicators of microstructural changes. The extracted ultrasonic eigenvalues also show promising, empirically derived correlations with mechanical properties, with frequency-domain attenuation coefficients demonstrating relatively higher sensitivity based on fitting analyses within the current dataset. These observed variations are tentatively discussed as plausible consequences of grain boundary scattering and changes in matrix solid solution strengthening associated with precipitate dissolution. Overall, the findings suggest the potential of laser ultrasonics as a rapid non-destructive evaluation tool, providing a preliminary scientific basis for further development of methods to assess the microstructure and mechanical properties of Al-Cu-Mg alloys within the tested parameter space.

Schlagwörter

Stichwörter der Autor:innen

aluminum alloylaser ultrasonicmechanical propertiesmicrostructurenondestructive evaluation

Autor:innen und Institutionen

  • Beijing University of Science and Technology Design and Research Institute Co., Ltd., Beijing 100083, China.
  • Institute of Engineering Technology, University of Science and Technology Beijing, Beijing 100083, China.
  • College of Mechanical and Automotive Engineering, Ningbo University of Technology, Ningbo 315336, China.
  • School of Mechanical Engineering and Intelligent Manufacturing, Ningbo University, Ningbo 315211, China.

Förderung

  • Zhejiang Provincial Natural Science Foundation
  • Projects in Science and Technique Plans of Ningbo City
  • Natural Science Foundation of Zhejiang Province

Zitieren

APA

Chen, C., Xu, Z., & Yin, A. (2026). Evaluation of Microstructure and Mechanical Properties of T6 Heat-Treated Al-Cu-Mg Aluminum Alloy Based on Laser Ultrasonics. Materials, 19(16), 3423. https://doi.org/10.3390/ma19163423

Vancouver

Chen C, Xu Z, Yin A. Evaluation of Microstructure and Mechanical Properties of T6 Heat-Treated Al-Cu-Mg Aluminum Alloy Based on Laser Ultrasonics. Materials. 2026;19(16):3423. doi:10.3390/ma19163423

BibTeX
@article{Chen2026,
  author = {Chen, Chaochao and Xu, Zhi and Yin, Anmin},
  title = {Evaluation of Microstructure and Mechanical Properties of T6 Heat-Treated Al-Cu-Mg Aluminum Alloy Based on Laser Ultrasonics},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {16},
  pages = {3423},
  doi = {10.3390/ma19163423}
}
Kostenlos starten →