Numerical Assessment of the Stamping Formability of SS304 Metallic Bipolar Plates with Side-Boss Parallel Flow Channels
Materials · 07.08.2026 · 19 (16) · 3362
DOI: 10.3390/ma19163362 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 07.08.2026. Verfasst von Zhonglan Hou und 10 weiteren Autor:innen. Beteiligte Einrichtung: School of Mechanical Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China. Die Arbeit nennt 50 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: China Scholarship Council, the Key Scientific Research Projects of Higher Education Institutions in Henan Province, the Major Science and Technology Projects in Henan Province.
Abstract (Originalsprache)
Side-boss parallel channels can enhance reactant transport and water removal in proton exchange membrane fuel cells, but their local protrusions increase the forming difficulty of ultra-thin metallic bipolar plates. This study numerically investigates the single-step stamping formability of 0.1 mm SS304 bipolar plates using Dynaform. The effects of side-boss number, side-boss height, and punch speed were evaluated through thickness distribution, maximum thinning ratio, and forming-limit-diagram states. The results show that side-boss height is the dominant geometric factor. Increasing the height from 0 to 0.75 mm raises the maximum thinning ratio from 17.69% to 29.87% and shifts the critical deformation regions from the conventional channel bottom toward the side-boss roots, boss tops, transition fillets, and channel corners. The number of side-boss sets produces a non-monotonic thinning response, with maximum thinning ratios ranging from 19.54% to 27.76% for the modified configurations. Punch speeds of 200, 500, and 800 mm/s yield comparable thinning levels of 24.60%, 23.09%, and 23.16%, respectively, whereas the value increases to 26.30% at 1100 mm/s. Under the present forming conditions, these findings establish a quantitative relationship between side-boss geometry, material-flow restriction, and strain localization, and provide practical guidance for geometry selection and stamping-process design of metallic bipolar plates.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Mechanical Engineering, North China University of Water Resources and Electric Power, Zhengzhou 450045, China.
- College of Engineering and Technology, University of Technology and Applied Sciences, Al-Khuwair, P.O. Box 74, Muscat 133, Oman.
- School of Computing, Engineering & Digital Technologies, Department of Engineering, Teesside University, Middlesbrough TS1 3BX, UK.
ORCID-Profile: Perk Lin Chong, Zhen Zhang
Förderung
- China Scholarship Council
- the Key Scientific Research Projects of Higher Education Institutions in Henan Province
- the Major Science and Technology Projects in Henan Province
- the National Foreign Expert Programme
- the Key Research and Development and Promotion Project in Henan Province
- Key Scientific Research Projects of Higher Education Institutions in Henan Province
- Major Science and Technology Projects in Henan Province
- National Foreign Expert Programme
Zitieren
APA
Hou, Z., Zhang, Y., Guo, P., Yazdi, M. H., Chong, P. L., Zhou, F., Bu, H., Zhu, X., Shen, J., Zhang, Z., & Gao, Y. (2026). Numerical Assessment of the Stamping Formability of SS304 Metallic Bipolar Plates with Side-Boss Parallel Flow Channels. Materials, 19(16), 3362. https://doi.org/10.3390/ma19163362
Vancouver
Hou Z, Zhang Y, Guo P, Yazdi MH, Chong PL, Zhou F, et al. Numerical Assessment of the Stamping Formability of SS304 Metallic Bipolar Plates with Side-Boss Parallel Flow Channels. Materials. 2026;19(16):3362. doi:10.3390/ma19163362
BibTeX
@article{Hou2026,
author = {Hou, Zhonglan and Zhang, Yibo and Guo, Pengyan and Yazdi, Mohammad Hossein and Chong, Perk Lin and Zhou, Fuwang and Bu, Haining and Zhu, Xiao and Shen, Jie and Zhang, Zhen and Gao, Yuguo},
title = {Numerical Assessment of the Stamping Formability of SS304 Metallic Bipolar Plates with Side-Boss Parallel Flow Channels},
journal = {Materials},
year = {2026},
volume = {19},
number = {16},
pages = {3362},
doi = {10.3390/ma19163362}
}
EUVIMED