Novel design and numerical evaluating of a cooling flow field in PEMFC with metallic bipolar plates
International Journal of Hydrogen Energy · 2026-08 · 263 · 129928
DOI: 10.1016/j.ijhydene.2020.07.066 ↗Kurz gefasst
Fachartikel in der Zeitschrift International Journal of Hydrogen Energy, 2026-08. Verfasst von M. Rahimi-Esbo und 3 weiteren Autor:innen. Die Arbeit wurde bisher 26-mal zitiert (Crossref) und nennt 31 Literaturangaben.
Abstract (Originalsprache)
Efficient cooling of proton exchange membrane fuel cells (PEMFCs) is vital for their safe operation and also attaining longer life and higher power. The narrow range of operating temperature and high manufacturing costs, have introduced major challenges in fuel cell designs. Recently, one of the main goals of the researchers has been laid upon solving these problems in order to commercialize the fuel cell. The manufacturing and machining of graphite plates is about 60% of the total stack cost. Due to the high flexibility, metal plates can be extruded easily by stamping therefore their manufacturing is more economical compared to graphite plates. By stamping a metal plate into the desired form, the reacting and cooling flow fields are shaped simultaneously and hence reduce the time of manufacturing compared to graphite plates. In this study, an innovative numerical design of fuel cell's cooling flow field with metallic bipolar plates is presented. In this design, it has been attempted to let the fluid pass through the cooling flow field using the spacer plate. The main design criterion is the uniform distribution of temperature. To evaluate the uniformity of temperature, the temperature contour and index of uniform temperature (IUT) have been taken into consideration. Moreover, at each step of the design procedure, the generated hot spots have been identified by the temperature contour and tried to be avoided for the next step. In the 1st design, the maximum temperature and IUT are 378 K and 2.09, respectively, which have been reduced to 351.20 K and 1.45, by step by step improvement of the 1st design. After achieving the desired design, the performance of the cooling design is investigated in various Reynolds numbers and finally, the Reynolds number 2500 is proposed as the suitable Reynolds number for the operation of this cooling design.
Zitieren
APA
Rahimi-Esbo, M., Rahgoshay, S., Hassani, M., & Firouzjaei, K. D. (2026). Novel design and numerical evaluating of a cooling flow field in PEMFC with metallic bipolar plates. International Journal of Hydrogen Energy, 263, 129928. https://doi.org/10.1016/j.ijhydene.2020.07.066
Vancouver
Rahimi-Esbo M, Rahgoshay S, Hassani M, Firouzjaei KD. Novel design and numerical evaluating of a cooling flow field in PEMFC with metallic bipolar plates. International Journal of Hydrogen Energy. 2026;263:129928. doi:10.1016/j.ijhydene.2020.07.066
BibTeX
@article{RahimiEsbo2026,
author = {Rahimi-Esbo, M. and Rahgoshay, S.M. and Hassani, M.M. and Firouzjaei, K. Dadashi},
title = {Novel design and numerical evaluating of a cooling flow field in PEMFC with metallic bipolar plates},
journal = {International Journal of Hydrogen Energy},
year = {2026},
volume = {263},
pages = {129928},
doi = {10.1016/j.ijhydene.2020.07.066}
}
EUVIMED