EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Sequential Carbide Precipitation During Tempering and Its Influence on Strength–Toughness Balance in 31CrMoNiNbV Secondary Hardening Martensitic Steel

Fengping Zhao, Yanjie Mou, Jie Hu, Xiying Ma, Xiaofei Guo iD

Materials · 27.07.2026 · 19 (15) · 3204

DOI: 10.3390/ma19153204 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 27.07.2026. Verfasst von Fengping Zhao und 4 weiteren Autor:innen. Beteiligte Einrichtung: School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China. Die Arbeit nennt 45 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Science and Technology Commission of Shanghai Municipality, Natural Science Foundation of Shanghai.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

The temperature-dependent carbide precipitation behavior and mechanical properties in 31CrMoNiNbV secondary hardening martensitic steel were investigated over a tempering temperature range of 200–650 °C. Sequential carbide precipitation behavior was characterized using scanning electron microscopy, electron backscatter diffraction and transmission electron microscopy, which was further correlated with tensile properties, hardness and low-temperature toughness. At the high tempering temperature of 580 °C, the investigated material achieved a well-balanced combination of tensile strength of 1633 MPa and total elongation of 15.1%, wherein tempering-induced M2C precipitation contributed to strength retention, while dislocation recovery and the formation of high-angle grain boundaries led to concurrent improvement in ductility and toughness. A predictive framework linking tempering temperature to carbides evolution and the resultant mechanical properties has been established for the investigated material, guiding the microstructural and heat treatment parameter design of ultra-high strength secondary hardening martensitic steels.

Schlagwörter

Stichwörter der Autor:innen

carbide precipitationmechanical propertiessecondary hardening martensitic steeltempering temperature

Autor:innen und Institutionen

  • School of Materials Science and Engineering, Shanghai University, Shanghai 200444, China.
  • State Key Laboratory of Advanced Special Steel, Shanghai University, Shanghai 200444, China.

ORCID-Profile: Xiaofei Guo

Förderung

  • Science and Technology Commission of Shanghai Municipality
  • Natural Science Foundation of Shanghai

Zitieren

APA

Zhao, F., Mou, Y., Hu, J., Ma, X., & Guo, X. (2026). Sequential Carbide Precipitation During Tempering and Its Influence on Strength–Toughness Balance in 31CrMoNiNbV Secondary Hardening Martensitic Steel. Materials, 19(15), 3204. https://doi.org/10.3390/ma19153204

Vancouver

Zhao F, Mou Y, Hu J, Ma X, Guo X. Sequential Carbide Precipitation During Tempering and Its Influence on Strength–Toughness Balance in 31CrMoNiNbV Secondary Hardening Martensitic Steel. Materials. 2026;19(15):3204. doi:10.3390/ma19153204

BibTeX
@article{Zhao2026,
  author = {Zhao, Fengping and Mou, Yanjie and Hu, Jie and Ma, Xiying and Guo, Xiaofei},
  title = {Sequential Carbide Precipitation During Tempering and Its Influence on Strength–Toughness Balance in 31CrMoNiNbV Secondary Hardening Martensitic Steel},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {15},
  pages = {3204},
  doi = {10.3390/ma19153204}
}
Kostenlos starten →