Experiments and Preliminary Modeling of Chloride Ingress in Concrete Interfaces Under Marine Drying–Wetting Environment
Materials · 21.07.2026 · 19 (14) · 3123
DOI: 10.3390/ma19143123 ↗Kurz gefasst
Fachartikel in der Zeitschrift Materials, online erschienen am 21.07.2026. Verfasst von Yuanyuan Cheng und 8 weiteren Autor:innen. Beteiligte Einrichtung: School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China. Die Arbeit nennt 60 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: National Natural Science Foundation of China, China Postdoctoral Science Foundation, China State Construction Engineering (China).
Abstract (Originalsprache)
A bond interface between new and old concrete is inherently present in bridge widening and rehabilitation projects. Under marine environmental conditions, this interface provides a preferential pathway for chloride ion transport, thereby accelerating chloride-induced corrosion of the bridge structure. Although the mechanical bonding performance of such interfaces has been extensively investigated, the durability of new-to-old concrete systems remains significantly inferior to that of monolithic concrete, particularly in terms of resistance to chloride penetration. In this study, chloride erosion tests on new-to-old concrete specimens were conducted under drying–wetting cycle conditions to investigate the influence of the bond interface on the spatial distribution and temporal evolution of chloride concentration. The results indicate that the chloride concentration at the bond interface is significantly higher than that in other regions. This leads to a dual transport mechanism, where chloride ions not only diffuse inward perpendicular to the exposed surface but also migrate laterally from the interface into the adjacent concrete driven by concentration gradients. Based on these findings, an interface influence coefficient is proposed to quantify the effect of the bond interface on chloride transport capacity. This coefficient exhibits a strong fit with the GaussAmp function. Furthermore, a diffusion coefficient model for new-to-old concrete incorporating the effect of the bond interface is established.
Schlagwörter
Stichwörter der Autor:innen
Autor:innen und Institutionen
- School of Water Conservancy and Transportation, Zhengzhou University, Zhengzhou 450001, China.
- China State Construction Engineering Corporation Seventh Division Co., Ltd., Zhengzhou 450004, China.
- State Key Laboratory of Tunnel Boring Machine and Intelligent Operation, Zhengzhou 450001, China.
ORCID-Profile: Jinjun Guo, Kun Wang
Förderung
- National Natural Science Foundation of China
- China Postdoctoral Science Foundation
- China State Construction Engineering (China)
- Research and Development Project of China Construction Seventh Engineering Division Corporation Limited
Zitieren
APA
Cheng, Y., Zhang, J., Zhao, Z., Ni, P., Meng, Q., Guo, J., Chen, H., Jiang, Y., & Wang, K. (2026). Experiments and Preliminary Modeling of Chloride Ingress in Concrete Interfaces Under Marine Drying–Wetting Environment. Materials, 19(14), 3123. https://doi.org/10.3390/ma19143123
Vancouver
Cheng Y, Zhang J, Zhao Z, Ni P, Meng Q, Guo J, et al. Experiments and Preliminary Modeling of Chloride Ingress in Concrete Interfaces Under Marine Drying–Wetting Environment. Materials. 2026;19(14):3123. doi:10.3390/ma19143123
BibTeX
@article{Cheng2026,
author = {Cheng, Yuanyuan and Zhang, Jinlong and Zhao, Zhiyuan and Ni, Peng and Meng, Qingxin and Guo, Jinjun and Chen, Hongrui and Jiang, Yazhou and Wang, Kun},
title = {Experiments and Preliminary Modeling of Chloride Ingress in Concrete Interfaces Under Marine Drying–Wetting Environment},
journal = {Materials},
year = {2026},
volume = {19},
number = {14},
pages = {3123},
doi = {10.3390/ma19143123}
}
EUVIMED