EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Development of Cross-Scale Structured Hybrid Fiber-Reinforced Shotcrete

Mengmeng Liu iD, Lu Zhang, Xiaoou Zhang, Wenwen Xing, Wenhua Zhu, Huadong Li, Zhiqiang Chen, Zhongjing Hu

Materials · 19.07.2026 · 19 (14) · 3102

DOI: 10.3390/ma19143102 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 19.07.2026. Verfasst von Mengmeng Liu und 7 weiteren Autor:innen. Beteiligte Einrichtung: School of Architecture and Civil Engineering, Xihua University, Chengdu 610039, China. Die Arbeit nennt 46 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Xihua University, Science and Technology Department of Sichuan Province, Sichuan Provincial Department of Science and Technology.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

With the increasing demand for tunnel construction under extreme geological conditions such as high geo-stress, rock bursts, and fault zones, the performance requirements for shotcrete in initial support systems have become more stringent. This study develops a cross-scale structured hybrid fiber-reinforced shotcrete by incorporating alkali-resistant glass fibers including HP and HD types with different lengths and carbon nanotubes (CNTs) into a conventional shotcrete matrix. An orthogonal experimental design at four factors and four levels was adopted to investigate the effects of fiber and CNT contents on the mechanical properties and microstructure of shotcrete. Uniaxial compressive strength, splitting tensile strength, slumping, rebound rate, and microscopic characteristics such as SEM were evaluated at 3, 7, and 28 days. Results show that the optimal mix proportion is 4% HP fiber (24 mm), 2% HD fiber (18 mm), 2% HD fiber (6 mm), and 0.2% CNT. Under this formulation, the 28-day compressive and splitting tensile strengths reached 43.53 MPa and 4.85 MPa, respectively, with a rebound rate as low as 3.85%. The enhanced performance is attributed to the multi-scale reinforcement mechanism. Long fibers suppress macroscopic cracks, short fibers bridge micro-cracks, and CNTs densify the interfacial transition zone. This study provides a parametric reference for the development of high-performance shotcrete and its engineering application in complex underground excavations.

Schlagwörter

Stichwörter der Autor:innen

alkali-resistant glass fibercarbon nanotubes (CNTs)cross-scale structured hybrid fiber-reinforced shotcretemechanical propertiesmicrostructureorthogonal experiment

Autor:innen und Institutionen

  • School of Architecture and Civil Engineering, Xihua University, Chengdu 610039, China.
  • College of Intelligent Construction and Environmental Engineering, Chengdu Qinggong Polytechnic University, Chengdu 611731, China.
  • Sinohybro Bureau 14 Co., Ltd., Kunming 650041, China.
  • School of Architecture and Civil Engineering, Chengdu University, Chengdu 610106, China.
  • School of Civil Engineering, Southwest Jiaotong University, Chengdu 610031, China.

ORCID-Profile: Mengmeng Liu

Förderung

  • Xihua University
  • Science and Technology Department of Sichuan Province
  • Sichuan Provincial Department of Science and Technology

Zitieren

APA

Liu, M., Zhang, L., Zhang, X., Xing, W., Zhu, W., Li, H., Chen, Z., & Hu, Z. (2026). Development of Cross-Scale Structured Hybrid Fiber-Reinforced Shotcrete. Materials, 19(14), 3102. https://doi.org/10.3390/ma19143102

Vancouver

Liu M, Zhang L, Zhang X, Xing W, Zhu W, Li H, et al. Development of Cross-Scale Structured Hybrid Fiber-Reinforced Shotcrete. Materials. 2026;19(14):3102. doi:10.3390/ma19143102

BibTeX
@article{Liu2026,
  author = {Liu, Mengmeng and Zhang, Lu and Zhang, Xiaoou and Xing, Wenwen and Zhu, Wenhua and Li, Huadong and Chen, Zhiqiang and Hu, Zhongjing},
  title = {Development of Cross-Scale Structured Hybrid Fiber-Reinforced Shotcrete},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3102},
  doi = {10.3390/ma19143102}
}
Kostenlos starten →