EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Bending Toughness and Toughening Mechanism of Polyoxymethylene Fiber-Reinforced Shotcrete

Shujian Li iD, Jun You, Menglai Wang, Xiangyun Kong, Guangjin Wang, Yuanting Zhu, Chen Sang iD, Xiaochuan Xia

Materials · 30.04.2026 · 19 (9) · 1842

DOI: 10.3390/ma19091842 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 30.04.2026. Verfasst von Shujian Li und 7 weiteren Autor:innen. Beteiligte Einrichtung: Yunnan Phosphate Chemical Group Co., Ltd., Kunming 650600, China. Die Arbeit nennt 34 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: the open fund project of National Engineering and Technology Research Center for Development &Utilization of Phosphate Resources, Key project of science and technology plan of Science and Technology Department of Yunnan Province, Central guidance of local science and technology development fund.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

To study the influence of polyoxymethylene (POM) fibers on the mechanical properties of shotcrete for tunnel support, this research conducted four-point bending tests on concrete with different POM fiber dosages (0, 5, 7, and 9 kg/m3) and lengths (30 mm, 36 mm, and 42 mm). The mechanical properties are analyzed in terms of failure modes, flexural strength, and the toughness index. The results show that, with the increase fiber length and dosage, the incorporation of POM fibers can enhance the toughness of concrete and significantly improve the flexural performance of shotcrete, with the peak flexural strength increasing by 15.31% to 89.46%. Additionally, through scanning electron microscopy (SEM) image analysis, the reinforcing mechanism of POM fibers is revealed: when shotcrete with POM fibers is subjected to flexural loading, it undergoes four stages: elastic, elastic–plastic, yield, and failure. The addition of POM fibers increases the density and uniformity of concrete, and the flexural strength is indirectly enhanced by increasing frictional energy dissipation through the formation of fiber–matrix interfaces between fibers and concrete. The research findings provide a theoretical basis and design reference for the application of POM fiber-reinforced shotcrete in tunnel support.

Schlagwörter

Stichwörter der Autor:innen

POM fiberflexural toughnessfour-point bending testreinforcing mechanismshotcrete

Autor:innen und Institutionen

  • Yunnan Phosphate Chemical Group Co., Ltd., Kunming 650600, China.
  • Guizhou Institute of Geo-Environment Monitoring, Guiyang 550081, China.
  • Faculty of Architectural Engineering, Kunming University of Science and Technology, Kunming 650500, China.
  • Faculty of Land Resources Engineering, Kunming University of Science and Technology, Kunming 650093, China.
  • Faculty of Public Safety and Emergency Management, Kunming University of Science and Technology, Kunming 650093, China.
  • Guizhou Urban and Rural Planning and Design Research Institute Co., Ltd., Guiyang 550081, China.

ORCID-Profile: Shujian Li, Chen Sang

Förderung

  • the open fund project of National Engineering and Technology Research Center for Development &Utilization of Phosphate Resources
  • Key project of science and technology plan of Science and Technology Department of Yunnan Province
  • Central guidance of local science and technology development fund
  • National Key Research, and Development Program of China
  • the "Thousand Talents" of Jiangxi Province
  • Open fund project of the Pilot Project of Ministerial-Provincial Collaboration under the Ministry of Natural Resources
  • the Geological Research Project of Guizhou Bureau of Geology and Mineral Exploration and Development
  • the Youth Guidance Project of Basic Research Program of Guizhou Provincial Department of Science and Technology

Zitieren

APA

Li, S., You, J., Wang, M., Kong, X., Wang, G., Zhu, Y., Sang, C., & Xia, X. (2026). Bending Toughness and Toughening Mechanism of Polyoxymethylene Fiber-Reinforced Shotcrete. Materials, 19(9), 1842. https://doi.org/10.3390/ma19091842

Vancouver

Li S, You J, Wang M, Kong X, Wang G, Zhu Y, et al. Bending Toughness and Toughening Mechanism of Polyoxymethylene Fiber-Reinforced Shotcrete. Materials. 2026;19(9):1842. doi:10.3390/ma19091842

BibTeX
@article{Li2026,
  author = {Li, Shujian and You, Jun and Wang, Menglai and Kong, Xiangyun and Wang, Guangjin and Zhu, Yuanting and Sang, Chen and Xia, Xiaochuan},
  title = {Bending Toughness and Toughening Mechanism of Polyoxymethylene Fiber-Reinforced Shotcrete},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {9},
  pages = {1842},
  doi = {10.3390/ma19091842}
}
Kostenlos starten →