EUVIMEDEUVIMED entdecken
Open Access · CC BY 4.0

Transient Damped Response of a 3D-Printed Composite Cantilever Beam

Miroslaw Wesolowski iD, Naftal Kaleb Ngughu iD, Jon Aurrekoetxea Narbarte iD

Materials · 16.07.2026 · 19 (14) · 3074

DOI: 10.3390/ma19143074 ↗

Kurz gefasst

Fachartikel in der Zeitschrift Materials, online erschienen am 16.07.2026. Verfasst von Miroslaw Wesolowski und 2 weiteren Autor:innen. Beteiligte Einrichtung: Faculty of Civil Engineering, Environmental and Geodetic Sciences, Koszalin University of Technology, 75-453 Koszalin, Poland. Die Arbeit nennt 36 Literaturangaben. Der Volltext ist frei zugänglich (Open Access, CC BY 4.0). Gefördert von: Narodowa Agencja Wymiany Akademickiej, Koszalin University of Technology, Polish National Agency for Academic Exchange.

AbstractSchlagwörterBibliografische AngabenZitierenVerwandte Studien

Abstract (Originalsprache)

This study presents a transient dynamic analysis of a 3D-printed composite cantilever beam fabricated from short carbon fibre-reinforced polyamide (CF-PA-12). Particular attention is given to acceleration response, vibration damping, and energy dissipation, which govern the transient behaviour and dynamic stability of lightweight composite structures under impulsive loading. The research combines experimental modal analysis (EMA) and transient impact testing with numerical simulations based on classical laminated plate theory (CLPT). A finite element model was developed in Simulia/Abaqus and used within a modal-superposition-based transient framework incorporating experimentally identified damping ratios and measured impact forces. The proposed approach enables realistic prediction of vibration decay and time-dependent acceleration response. Good agreement between experimental and numerical results confirms the capability of the method to reproduce the dynamic behaviour of additively manufactured composite beams subjected to impact excitation.

Schlagwörter

Stichwörter der Autor:innen

3D printingCLPTcomposite beamfinite element analysismodal dampingtransient analysis

Autor:innen und Institutionen

  • Faculty of Civil Engineering, Environmental and Geodetic Sciences, Koszalin University of Technology, 75-453 Koszalin, Poland.
  • Mechanical and Industrial Production Department, Mondragon Unibertsitatea, 20500 Mondragón, Spain.

ORCID-Profile: Miroslaw Wesolowski, Naftal Kaleb Ngughu, Jon Aurrekoetxea Narbarte

Förderung

  • Narodowa Agencja Wymiany Akademickiej
  • Koszalin University of Technology
  • Polish National Agency for Academic Exchange

Zitieren

APA

Wesolowski, M., Ngughu, N. K., & Aurrekoetxea Narbarte, J. (2026). Transient Damped Response of a 3D-Printed Composite Cantilever Beam. Materials, 19(14), 3074. https://doi.org/10.3390/ma19143074

Vancouver

Wesolowski M, Ngughu NK, Aurrekoetxea Narbarte J. Transient Damped Response of a 3D-Printed Composite Cantilever Beam. Materials. 2026;19(14):3074. doi:10.3390/ma19143074

BibTeX
@article{Wesolowski2026,
  author = {Wesolowski, Miroslaw and Ngughu, Naftal Kaleb and Aurrekoetxea Narbarte, Jon},
  title = {Transient Damped Response of a 3D-Printed Composite Cantilever Beam},
  journal = {Materials},
  year = {2026},
  volume = {19},
  number = {14},
  pages = {3074},
  doi = {10.3390/ma19143074}
}
Kostenlos starten →